Stumpbroke 036 v/s Muffler Modded 044 same bar and chain same fuel same opperator same wood
044
Stumpbroke 036
Stumpbroke 036 v/s Muffler Modded 044 same bar and chain same fuel same opperator same wood
044
Stumpbroke 036
click here>>>>>>
Spencer
Stihl 019
Stihl 036 (StumpBroke)
Stihl 044
Stihl 066 (thanks Stumpy, WSC, Logging22 )
and a few saws in a box
MS 290 tear down 029 rebuild
I forgot to mention it's a 25" bar with 3/8 RSC chain
click here>>>>>>
Spencer
Stihl 019
Stihl 036 (StumpBroke)
Stihl 044
Stihl 066 (thanks Stumpy, WSC, Logging22 )
and a few saws in a box
MS 290 tear down 029 rebuild
Looks like they're about dead even. Nice!
Brad - Snellerized Saws
Have a 201T that doesn't run like you expected? Need a new one that's already modded and ready to go? PM me for details.
Close, the 036 sounds a little more angry.
Lighten up francis
In my experience an 044 out cuts an 036 quite easily.
/
Grow more vegetables!
"I would rather have a mind opened by wonder than one closed by belief." - Gerry Spence
"A new scientific truth does not triumph by convincing its opponents and making them see the light, but rather because its opponents eventually die, and a new generation grows up that is familiar with it
Max Planck
The 036 is a hair faster by my stopwatch.
"Troubles will come....and they will pass"
"Always remember that You are unique... just like everyone else"
288xp hi top
371xp lo top
365 Special with 372 top end
670 Champ with ported 272 top end
2071
026
020T
2065 with 2171 top end powering a Lewis winch
335FR Brushcutter
BR340 Backpack Blower - ported BR420 top end
BG75 Handheld Blower - ported
066 flat top project
Englander NC-13 to keep the house warm
interesting.
what kind of wood is that? Ive personally found my 036 starts to bog when buried with anything larger than about a 22" bar. The 25", while it will work, slows my 036 down considerably because of strain.
Dolmar 102, 5100, 7300, 7900, 143
Stihl 026, 036, 044, 440Mag, 460Mag, 660Mag
Husqvarna 50, 346NE, 359, 268XP
To all the saws Ive loved before (sorry, I had to let you go...) ha:
Stihl 056AV MagnumII (x3), Stihl 08S (x3), Stihl 084, Stihl 020av, Stihl 066 (x2), Stihl 034S, Husqvarna 262XP (x2), Husqvarna 141, Husqvarna 65L, Husqvarna 365, Husqvarna 371, Husqvarna 281(x2), Husqvarna 288(x2), Jonsered 49sp,
Jonsered 2071, Homelite XL 12 (x5), Homelite XL 2
click here>>>>>>
Spencer
Stihl 019
Stihl 036 (StumpBroke)
Stihl 044
Stihl 066 (thanks Stumpy, WSC, Logging22 )
and a few saws in a box
MS 290 tear down 029 rebuild
Here is a vid of the 036 right before Stumpy did surgery on it
click here>>>>>>
Spencer
Stihl 019
Stihl 036 (StumpBroke)
Stihl 044
Stihl 066 (thanks Stumpy, WSC, Logging22 )
and a few saws in a box
MS 290 tear down 029 rebuild
I was wanderin how they would stack up. I'm glad we did this. I figured they would be pretty much dead even. Didn't expect the 036 to be faster, was hopein, but didn't expect it.
Nice camera work BTW.
MAH!!!!![]()
Song of the week
Stage 1 mods $150
widen intake and exhaust ports
optimize squish clearance
minor muffler modification (open existing outlet)
Stage 2 mods $250
transfer port work
adjust port timing
advance ignition timing
cut the squish band
Stage 3 mods $350
same as stage 2 plus
additional portwork
lighten piston
lighten flywheel
thin carb screws
open muffler up extensively
(shipping & parts not included)
Too many saws...
Only need one more...
"Ya just can't get naked enough to stay cool in that kinda heat"...Nope. I am sans gall bladder therefore I must be ever so careful as to the food I ingest for fear of making a Jackson Pollack painting in my britches... Jon1212
(Loggin22)
I saw some darn good operators up there and you and loggin 22 are right up there with the best I've seen Matt. Man could learn a lot from you guys.
Lighten up francis
Stumpy did a great job on that 036!
Especially for a Stihl.
Mah!![]()
Don
346xp OE, 346xp NE, 357xp, 562xp, Stump Broke 365xpw, 359, Super Split, Kubotas' and some other stuff...
Looks good.
How much lighter is the 036 than the 044?
Too bad the 036 has that crappy air filter. Be nice to have a HD filter setup on one.
not for hire......
Nuttin to see here....move along.....
click here>>>>>>
Spencer
Stihl 019
Stihl 036 (StumpBroke)
Stihl 044
Stihl 066 (thanks Stumpy, WSC, Logging22 )
and a few saws in a box
MS 290 tear down 029 rebuild
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks