...Carl
I love the smell of sawdust in the morning!
===================================
Orange Stihls = 090, 090AV, 056, 08S, 07S & MS290
RED Stihls = 08, S10, Contra (X2), Contra S, & 1st yr "Sand Cast" Red Lightning
Huskys = 55, & 285CD
MAC = 10-10A, 250
Poulan = 45
Pioneer 610
================================
Sorry about that Carl.............I had another that you took of me with the saw, but it was only about 4 seconds of your right foot!
Dean![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
Another of Ernie with his 71A
![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
ECHO CST-610 EVL RARE TWIN CYLINDER CHAINSAW PRISTINE CONDITION! ORIGINAL OWNER | eBay
Nevermind that cheap. busted-up saw........................... here's a nice one real cheap.
Dean![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
DISCLAIMER: Any information I provide is for general knowledge purposes only and may be heavily bias due to my own experiences.
"I do not jerry rig!! I make custom parts from alternative materials."
"I was hoping for a battle of wits but I see you appear to be unarmed...."
I hope Rudedog or Sawmandave will get it. I've got these high-tech 50s' models driving me nutz!
Dean![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
Vac-tested the PL-5A, i got from Dino50....the flywheel side crankcase half is leaking....not at the seal...through the actual case.....Nice
The 3400 is completely torn down...awaiting bearings and seals. Once those are in, the fun begins.
Last edited by Pioneer fan; 04-07-2012 at 03:00 PM.
SLIGHT CASE OF C.A.D
The Fleet:
Runners
Stihl MS290 MM'ed
Stihl Ms170 (WT-215 swap MM'ed)
Craftsman 3.7 ported, MM'ed
Mac Pm610
Echo Cs-315
Homelite Sxl-Ao
(2) pioneer P20's
Sears U4g
Homelite 7-19
Poulan 2150(the pipe saw) Ported, piped
Remington PL-5A
Poulan PP4218avx (project "scrap-iron")
Echo 330vl
John Deere 60v
pioneer 2270
Homelite 707g
Pioneer Super 2400
Pioneer 650
Direct drive David Bradley(AH-47)
Craftsman 3.7 (Roper)
Another Wildthing pipe saw
Hi guys thanks for the good time, looking forward to martianville at the end of the mouth.Camera 160.jpg
...Carl
I love the smell of sawdust in the morning!
===================================
Orange Stihls = 090, 090AV, 056, 08S, 07S & MS290
RED Stihls = 08, S10, Contra (X2), Contra S, & 1st yr "Sand Cast" Red Lightning
Huskys = 55, & 285CD
MAC = 10-10A, 250
Poulan = 45
Pioneer 610
================================
Alright guys, need help. I vacuum tested some saws a day or so before the GTG and now I can't find my pump. I'm not one to loose stuff or forget where it was placed last..... however, I can't find it and am wondering if it ended up in a box of swap meet parts that was collectively set in a pile with the others. It was a Stihl pump, all silver color and has a rubber hose stuck in the end with a brass fitting.
Figured I'd try here?
Randy
Affordable solutions to OEM
Complete Meteor, Tecomec, HyWay kits , Pistons and more!
http://www.weedeaterman.com/default.asp
I have access to every brand of aftermarket part... ask
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
$865 w/4.5 days left......................reserve not met! YIKES!
Igpoe![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
I figured my U4G out...finally. After rebuilding carb, twice, it still ran like a dog. Curiousity took over, and I swapped the "stock" cylinder back on. I must have gotten something wrong, becuase it seems to run fine now. Either that, or this PP carb, had no idea how to handle the increased compression, and flow of the other cylinder. Stock cylinder, fresh rings, compression is now back down to 115 lbs, and it runs great, so that is how it will stay. Guess this cylinder will go on the Lombard project, as it now sports a tilly HL, we will see what it does there.
SLIGHT CASE OF C.A.D
The Fleet:
Runners
Stihl MS290 MM'ed
Stihl Ms170 (WT-215 swap MM'ed)
Craftsman 3.7 ported, MM'ed
Mac Pm610
Echo Cs-315
Homelite Sxl-Ao
(2) pioneer P20's
Sears U4g
Homelite 7-19
Poulan 2150(the pipe saw) Ported, piped
Remington PL-5A
Poulan PP4218avx (project "scrap-iron")
Echo 330vl
John Deere 60v
pioneer 2270
Homelite 707g
Pioneer Super 2400
Pioneer 650
Direct drive David Bradley(AH-47)
Craftsman 3.7 (Roper)
Another Wildthing pipe saw
Every single one of you is hereby invited to attend the Halifax Co. Heritage and Antique Machinery Festival to be held on May 5 behind South Boston, Va. Speedway in our fairgrounds. Halifax County, VA Heritag Festival Pics & Videos should be the link to it. I just talked to the boss today and he says we'll have a tractor-trailer load of assorted sized wood at our disposal. That is a lot! The Fest has it's own website of course. Just drop me a line if you can come so I'll plan correctly.
Dean![]()
" Hey fellas, this war is gonna be over one day, and when it is, we're gonna need all the Bible salesmen we can find"
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks