Whats a running 61 ,20 inch bar and 7 extra chains worth . Guy is looking for $ 275
Whats a running 61 ,20 inch bar and 7 extra chains worth . Guy is looking for $ 275
Stihl 460,Timber bear,2 Husky 350's,330 Homelite
1960 Tbird conv,1966 SS Chevelle ,1969 AMX,1963 R-2 Avanti,1962 Lark convertible
That's an Ebay price. I would not go more than about $200-225 if it is in good, but not perfect, shape.
Do you know the year model? Some of the first ones with the white tops were only 3.7hp. Later versions were 4.1(?)HP. Early models also had metal CB handles and later ones were switched to plastic. Either of these could easily be swapped so I would want to look at the SN plate.
The 7 extra chains should be considered a bonus. He clearly doesn't have another saw they fit so he's trying to sell them with the saw. What's he gonna do if you don't take the chains??? Nothing they just became worthless to him![]()
ms170 14"
ms290 20" with muffler mod
038AV Magnum II 20"
036 20" torn down
Not a white top saw . Spoke with the guy said it runs well and was just serviced and I could look at it any night or this weekend. I told him flat out I wouldn't pay 275 for it .His response take a look and make me an offer
Stihl 460,Timber bear,2 Husky 350's,330 Homelite
1960 Tbird conv,1966 SS Chevelle ,1969 AMX,1963 R-2 Avanti,1962 Lark convertible
I wouldn't go more than $150 for an excellent clean one .
price sounds about right to me
here in ireland a clean perfect runner (complete orange saw) probably 1993 model or slightly earlier with 20"b/c can fetch 350euros all day!!
the older ones the same,age don't matter with 61 aslong as oil pump,B/C and engine is in good order.
qualified tree care specialist and forest worker
husqvarna 365 special-husqvarna 440xtorq-husqvarna .61-sthil av045
always think saftey & wear a mask also it helps not to frighten people off --lol
I would like to inspect those chain before I put any value on them, and the price seem too high for an outdated low performance saw!![]()
Firewood saws: Jonsereds Raket 621 (1970), Husky 353G (2003), Euro Stihl MS361W (2004), Husky 372xpg (nov 2006), Husky 339xp (may 2007), Husky 346xpg New Edition (sept 2007), Jonsered 2153WH (april 2010), Husky 560xpg (nov 2011).
Witchys saw, Dolmar PS5100SH (also may 2007). Rest in peace, my love!
Flying Witch smiley by talon1189.
Avatar by 04Ultra.
I offered $125 . He didn't take it but did take my # in case he doesn't sell it . If he calls back I will go lower
Stihl 460,Timber bear,2 Husky 350's,330 Homelite
1960 Tbird conv,1966 SS Chevelle ,1969 AMX,1963 R-2 Avanti,1962 Lark convertible
I think $200 is a fair price for a modern 60cc 4.1hp saw. It is worth it if it is in good shape. If it was my saw, I would have been insulted and thought you were a low-baller if you offered me $125 for that saw (assuming the condition is satisfactory).
I can never get the concept of being insulted about an offer. I have had offers on cars, motorcycles etc that were to low to even consider but I was never insulted I just came back with a counter price this guy didn't even do that . Its only a piece of equipment
Stihl 460,Timber bear,2 Husky 350's,330 Homelite
1960 Tbird conv,1966 SS Chevelle ,1969 AMX,1963 R-2 Avanti,1962 Lark convertible
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks