ArboristSite.com Sponsors
 
 



 
 


Page 1 of 2 12 LastLast
Results 1 to 15 of 20
Like Tree11Likes

Thread: I don't have CAD but...

  1. 07-14-2012, 01:17 PM #1
    fearofpavement
    fearofpavement is online now
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Join Date
    Jul 2010
    Location
    middle Georgia
    Posts
    2,500
    Credits
    1,146

    I don't have CAD but...

    I am pretty sure I am not infected with CAD. However, I did buy a Stihl 028 Wood Boss today. Oh, and an 028 Super. Didn't need either one of them but they were lonely and needed a home. They are now happily riding in the back of the HHR with the 10 chainsaw bars I purchased earlier on this trip. They both run. I'll tweak them and run them some and someday they will probably show up in the classifieds here. May be a few months as they are about 47 lines down on the "to do" list.
    Stihl 018C, Stihl 019T, Stihl 026 x 2, Stihl 028 Super, Stihl MS660, Stihl 070, Husky 455, Husky 55, Jonsered 2172, Mac 10-10A left and right start, Poulan truck saw, 12v DC powered chainsaw, Stihl HT101 pole saw.
    Reply With Quote Reply With Quote
  2. 07-14-2012, 01:27 PM #2
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    Quote Originally Posted by fearofpavement View Post
    I am pretty sure I am not infected with CAD. However, I did buy a Stihl 028 Wood Boss today. Oh, and an 028 Super. Didn't need either one of them but they were lonely and needed a home. They are now happily riding in the back of the HHR with the 10 chainsaw bars I purchased earlier on this trip. They both run. I'll tweak them and run them some and someday they will probably show up in the classifieds here. May be a few months as they are about 47 lines down on the "to do" list.
    If you dont have cad then you better start logging off because your sig shows you with a bunch of saws that just showed up,if you had bought an 038 mag then we would be suggesting therapy ,like cooking forums etc.

    2 biggest lies ever told by a cad patient 1. I only bought it to sell and invest the profits elsewhere. 2.One more and i will get a cab and go home.
    rolltide and ChainFinn like this.
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
  3. 07-14-2012, 01:50 PM #3
    fearofpavement
    fearofpavement is online now
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Join Date
    Jul 2010
    Location
    middle Georgia
    Posts
    2,500
    Credits
    1,146
    Quote Originally Posted by deerjackie View Post
    If you dont have cad then you better start logging off because your sig shows you with a bunch of saws that just showed up,if you had bought an 038 mag then we would be suggesting therapy ,like cooking forums etc.

    2 biggest lies ever told by a cad patient 1. I only bought it to sell and invest the profits elsewhere. 2.One more and i will get a cab and go home.
    That's the other guys. NOT ME. I buy saws to sell and invest the profits in um, saws. That works better if there ARE profits. A lot cheaper than Mustangs.
    Stihl 018C, Stihl 019T, Stihl 026 x 2, Stihl 028 Super, Stihl MS660, Stihl 070, Husky 455, Husky 55, Jonsered 2172, Mac 10-10A left and right start, Poulan truck saw, 12v DC powered chainsaw, Stihl HT101 pole saw.
    Reply With Quote Reply With Quote
  4. 07-14-2012, 02:42 PM #4
    Roll Tide
    <span style='color: #8B0000'>Roll Tide</span> is offline
    Trolltide
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     <span style='color: #8B0000'>Roll Tide</span>'s Avatar
    Join Date
    Apr 2012
    Location
    Soddy Daisy, TN
    Posts
    1,581
    Credits
    471
    Yeah I acquired my 395 XP for doing a tree job. So I could sell it and make some money. Only one problem.....I can't bring myself to sell it. Lol
    deerjackie likes this.
    395xp Masterminded
    562xp Masterminded
    MS441 Masterminded,sold but not forgotten
    MS261 Masterminded
    026pro Sent to Randy for some serious work.
    MS192T Muffler Mod



    ROLL TIDE!!!!



    Originally Posted by Rokon

    The saw was $299.00, but the matching Justin Bieber chaps were $501.00!!!
    Reply With Quote Reply With Quote
  5. 07-14-2012, 02:48 PM #5
    mattinky
    mattinky is offline
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     mattinky's Avatar
    Join Date
    Nov 2006
    Location
    kentucky
    Posts
    2,001
    Credits
    214
    You're in denial. You must face the fact that you have CAD.
    deerjackie, H 2 H and ChainFinn like this.
    Reply With Quote Reply With Quote
  6. 07-14-2012, 02:53 PM #6
    fearofpavement
    fearofpavement is online now
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Join Date
    Jul 2010
    Location
    middle Georgia
    Posts
    2,500
    Credits
    1,146
    Quote Originally Posted by mattinky View Post
    You're in denial. You must face the fact that you have CAD.
    Well, I could have a mild case. But I mean, it's not like SOME of you guys that bring them home by the semi load. I can quit anytime you know...
    deerjackie likes this.
    Stihl 018C, Stihl 019T, Stihl 026 x 2, Stihl 028 Super, Stihl MS660, Stihl 070, Husky 455, Husky 55, Jonsered 2172, Mac 10-10A left and right start, Poulan truck saw, 12v DC powered chainsaw, Stihl HT101 pole saw.
    Reply With Quote Reply With Quote
  7. 07-14-2012, 03:15 PM #7
    fearofpavement
    fearofpavement is online now
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Join Date
    Jul 2010
    Location
    middle Georgia
    Posts
    2,500
    Credits
    1,146

    Let's do some analysis...

    Stihl 009L, Stihl 018C, Stihl 019T, Stihl 026, Stihl 039, Stihl 066, Stihl MS660, Husky 455, Husky 55, Jonsered 2172, Craftsman 3.7, Poulan 3400, Homelite and Poulan truck saws, 12v DC powered chainsaw, Stihl HT101 pole saw.

    That list is my current inventory (plus the two 028's that actually don't count because I haven't brought them home)

    The Stihl 009L, Stihl 018C, Stihl 026 and Stihl 039 are all saws that I have owned for many years.
    The Husky 455 was a Christmas gift to my son and belongs to him as does the Homelite Super 2. So can't count those two.

    The two CounterVibes are "passing through". The 3400 is on the classifieds and the 3.7 cuts really well so I haven't tried to market that yet...

    The Husky 55 is my "Ok, I'll give Husky a try" saw. I haven't used it enough to decide its future. I have a lot invested in it.

    The Stihl 019T, HT101 Pole saw, and MS660 we got for our mini tree service company and they are not going anywhere.

    The Stihl 066 is subbing in for the MS460 that I haven't acquired for our lineup.

    The Jonsered 2172 is the second attempt at a substitution for an MS460. I haven't used that saw yet so I can't decide its future.

    The 12 volt chainsaw, I have never used but I like the concept of it so hang onto it. I didn't buy it, came with a pile of junk I was cleaning up from an estate. I suppose I should at least test it out in the woodpile.

    The Poulan Super Clean is a truck saw that gets used about 3 minutes at a time a few times a year. I have very little invested in it and have never had to repair it as far as I remember.

    The two Stihl 028's I purchased today have no place in the line-up. I can see in the future possibly selling the WB and replacing the Husky 55 with the Super. I did not get these saws overly cheap (north of $200) but think there is "room" between what I paid and what they would bring in a "well advertised auction". So, that isn't really CAD. is it?? It is? Rats!
    Stihl 018C, Stihl 019T, Stihl 026 x 2, Stihl 028 Super, Stihl MS660, Stihl 070, Husky 455, Husky 55, Jonsered 2172, Mac 10-10A left and right start, Poulan truck saw, 12v DC powered chainsaw, Stihl HT101 pole saw.
    Reply With Quote Reply With Quote
  8. 07-14-2012, 03:20 PM #8
    fearofpavement
    fearofpavement is online now
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Join Date
    Jul 2010
    Location
    middle Georgia
    Posts
    2,500
    Credits
    1,146
    I am pretty sure it can't be CAD because I drove right near here and didn't buy this: Echo Chain Saw See? that's showing some real restraint.
    deerjackie likes this.
    Stihl 018C, Stihl 019T, Stihl 026 x 2, Stihl 028 Super, Stihl MS660, Stihl 070, Husky 455, Husky 55, Jonsered 2172, Mac 10-10A left and right start, Poulan truck saw, 12v DC powered chainsaw, Stihl HT101 pole saw.
    Reply With Quote Reply With Quote
  9. 07-14-2012, 05:30 PM #9
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    Quote Originally Posted by fearofpavement View Post
    I am pretty sure it can't be CAD because I drove right near here and didn't buy this: Echo Chain Saw See? that's showing some real restraint.
    Of course you didn t buy it, it is in pa near the jersey line ,better come up with a better excuse i f you are still in ga.lol
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
  10. 07-14-2012, 05:49 PM #10
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    [QUOTE=rolltide;3743413]Yeah I acquired my 395 XP for doing a tree job. So I could sell it and make some money. Only one problem.....I can't bring myself to sell it. Lol[/QUOTEKinda like working at a harley dealer and riding another brand , boss make you park it where it cant be seen?
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
  11. 07-14-2012, 06:38 PM #11
    Eccentric
    Eccentric is offline
    Ursus Arctos Circus
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     Eccentric's Avatar
    Join Date
    Jan 2007
    Location
    Northern California.
    Posts
    12,474
    Credits
    378
    Somone's on a ride down that river in Egypt....
    deerjackie likes this.
    -Aaron

    Quote Originally Posted by RandyMac View Post
    Why wear a speedo when you could go naked?

    Don't tune old saws with a tach!
    Tune the H side so that it burbles (four strokes) at WOT unloaded and just cleans up when under load. When you lift cutting pressure, the saw should revert to four stroking.


    --John 3:16--
    Reply With Quote Reply With Quote
  12. 07-14-2012, 08:15 PM #12
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    Urban Dictionary: denial
    Eccentric likes this.
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
  13. 07-14-2012, 08:25 PM #13
    Roll Tide
    <span style='color: #8B0000'>Roll Tide</span> is offline
    Trolltide
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     <span style='color: #8B0000'>Roll Tide</span>'s Avatar
    Join Date
    Apr 2012
    Location
    Soddy Daisy, TN
    Posts
    1,581
    Credits
    471
    [QUOTE=deerjackie;3743654]
    Quote Originally Posted by rolltide View Post
    Yeah I acquired my 395 XP for doing a tree job. So I could sell it and make some money. Only one problem.....I can't bring myself to sell it. Lol[/QUOTEKinda like working at a harley dealer and riding another brand , boss make you park it where it cant be seen?
    well I haven't brought it yet they said I shamed them by getting a husky .lol
    395xp Masterminded
    562xp Masterminded
    MS441 Masterminded,sold but not forgotten
    MS261 Masterminded
    026pro Sent to Randy for some serious work.
    MS192T Muffler Mod



    ROLL TIDE!!!!



    Originally Posted by Rokon

    The saw was $299.00, but the matching Justin Bieber chaps were $501.00!!!
    Reply With Quote Reply With Quote
  14. 07-14-2012, 08:42 PM #14
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    [QUOTE=rolltide;3743888]
    Quote Originally Posted by deerjackie View Post
    well I haven't brought it yet they said I shamed them by getting a husky .lol
    Payraise= sold husky,lol
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
  15. 07-14-2012, 08:54 PM #15
    deerjackie
    deerjackie is offline
    Senior Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation     deerjackie's Avatar
    Join Date
    Jan 2008
    Location
    W TN.
    Posts
    400
    Credits
    517
    Chainsaw Addiction Disorder shirt from Zazzle.com they have them in your size.The first and hardest step is admitting you have a problem!!!! lol
    HEY YALL WATCH THIS. I am a BBQ pit logger.I am trying to figure out what i am figuring out!!!!!Proud to be a US NAVY Vet . hooked on 038 magnums
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Page generated in 0.27690 seconds with 43 queries [Server Loads: 2.07 2.22 : 2.22]