Thread: Anyone tried the Bailey's 066 Crank?

Has anyone tried the Bailey's 066 crank? The big end bearing in my $25.00 066is toast. I am seriously thinking about trying one of their cranks. Are does anyone of you have a good OEM crank for a 066. PM me. Thanks. Also I need a IPL for the 066. This will be my first case splitting rebuild.

what model is the 066 that u have..big crank/little crank...

btw..i haven't tried the Baileys crank

It has Magnum on it, so how do I tell which 066 I have?

Aluminum or polymer flywheel?

It's aluminum, Just broke my freaking hand on a winch, slow typing.

The Bailey's cranks are the new style for the polymer flywheel so they won't work with your aluminum flywheel saw.

My 066 has the aluminum fly wheel. I need a crank. Since I busted my right hand up, now I need someone to put the crank, bearings, and seals in provided I can find a crank. Who, or which sponser can I sent it to?

Well he is not exactly sponser, but THall is somewhat famous for his Stihl service and is located in Va.
Lakeside is also very good (Ha Understatement) but he is on the far coast.

I have the good used small end 066 cranks for $75 plus shipping, Dave.

A little confirmation is needed here...
I am looking to place an order for crankcase bearings for an older model 066 sn 126xxxxxx.

My ipl list these parts as flywheel side: 9503 003 6676
Clutch side: 9523 003 4555.

I know there where a couple of different crank sizes over the years.

Here's what I'm trying to do... put a crank from a 130 806 650 (bad)case into a 126 490 249 (good) case. Are these interchangeable? If so, are the bearings I have listed above the right ones for the 126xxxxxx case?

Thanks, I tried searching for this info but couldn't find it-though I know I've run accross it before.

Andy

I just realized I posted this as a reply to an incredibly old thread...In a hurry on lunch break...

There are only two different cranks. One has a larger flywheel side bearing and taper for the flywheel.