100 octane gas will "burn up" saw???

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Plasmech

Addicted to ArboristSite
Joined
Dec 13, 2008
Messages
1,164
Reaction score
82
Location
Aston, PA (19014)
I've got a landscaper guy telling me that the 100 octane "jet fuel" that I'm running will burn up my saws. I don't understand how this could be, but I wanted to run it by you guys just to be safe. The only reason I buy 100 is to get actual gasoline and not ethanol. Is there any way excessive octane could hurt an engine? I mean the answer has to be "no" right?

(By the way, I didn't bother to explain to this guy that Jet A is nothing more than glorified kerosene)
 
100LL is avation gas for lower (then the real hi-performance) performance engines.

We ran kerosene instead of Jet 'A' , but a gas engine will not run on it, pictures is a J-85 Jet engine at 75% full AB on kerosene.

attachment.php
 
The higher octane actually burns slower than say "regular" gas.

Thats how they avoid preignition in higher compression race style motors.

Its a common misconception.

I would think it would be fine - but not necessary. I run 93 in my saws.
 
I've got a landscaper guy telling me that the 100 octane "jet fuel" that I'm running will burn up my saws. I don't understand how this could be, but I wanted to run it by you guys just to be safe. The only reason I buy 100 is to get actual gasoline and not ethanol. Is there any way excessive octane could hurt an engine? I mean the answer has to be "no" right?

(By the way, I didn't bother to explain to this guy that Jet A is nothing more than glorified kerosene)

You are obviously a smart man and don't need us to tell you that your landscaper guy is smoking his clippings. I know you're smart because you belong to AS and you run 100LL in your saws. Also you didn't bother to waste your breath explaining the whole Jet-A vs. Kerosene thing to him.

All the guys that have responded are correct as usual.:cheers:

I am constantly amazed at the misconception that lots of people have about avgas and jet fuel. I've lost track of how many times I've explained it to guys who are amazed at the explanation.

So, add me to your list of supporters...I know I'm in good company.

Hey..how about telling your landscaper that you're now running your saws on hydrazine and liquid oxygen...but you had to tweak the flux capacitor for optimal performance!
 
You are obviously a smart man and don't need us to tell you that your landscaper guy is smoking his clippings. I know you're smart because you belong to AS and you run 100LL in your saws. Also you didn't bother to waste your breath explaining the whole Jet-A vs. Kerosene thing to him.

All the guys that have responded are correct as usual.:cheers:

I am constantly amazed at the misconception that lots of people have about avgas and jet fuel. I've lost track of how many times I've explained it to guys who are amazed at the explanation.

So, add me to your list of supporters...I know I'm in good company.

Hey..how about telling your landscaper that you're now running your saws on hydrazine and liquid oxygen...but you had to tweak the flux capacitor for optimal performance!
:agree2:tom trees :cheers:
 
I'd love to try avgas, but it's the LL part that keeps me from doing it.

Does anyone know if avgas (not Jet A) is available without the lead?



.
 
Back in the 70' and 80's people would run out in droves to the airport to get fuel for the weekend at the drag strip for better performance. When we got old enough to get our drivers licence we went get some for our MX bikes. The dude at the airport said it was not a good idea to run it in a 2 stroke engine because it was a very dry fuel. He said if we must try it we should mix in plenty of extra oil to make up for it.

I have no idea if the guy was right or not because we decided on the side of caution because we werea bunch of punk azz high school jobless fooks and couldn't aford engine failure.
 
And slower.

I am not a mechanic or anything but I would have to argue Av gas making them slower. Why would they run high octane fuel in race bikes (motocross), atleast they did before the 4 stroke era. If they can design $100,000 race bikes, I doubt they are lacking the knowlege about proper fuel.:cheers:
 
Tetra-ethyl lead has been used in gasoline since the early teens to prevent knocking, no, the avgas won't "hurt" you. It was in virtually all gasolines up until 1985, so the hysterical hair-pulling occasionally seen here can be ignored.

Avgas is no more "dry" (what the h**l is that anyway?), than any other gas.

I would love to see a dyno sheet with a engine run on regular and then avgas to see if it was "slow" or "lost power". Haven't seen one yet, but have seen many comments on this.
 
I'd love to try avgas, but it's the LL part that keeps me from doing it.

Does anyone know if avgas (not Jet A) is available without the lead?



.

Check your local motorsports shop. They usually sell VP race gas, I think it is 104 octane, comes in 5 gal steel jugs. It smells good to, the exhaust that is.:greenchainsaw:
 
I have found 100LL to make my saws run slower and have had this confirmed by another engine builder respected here by most everyone. I'm not going to pretend to know more than I do here, but I'll take a stab at it.

High compression engines require the higher octane or burn up the engine due to pre-ignition. The high octane fuel is not making this power, it's just allowing the engine to run as it should without damage. Your typical stock or woods ported saw does not need this octane. Higher octane fuel burns cooler and slower. Your saw doesn't need this and as a result runs slower.
 

Latest posts

Back
Top