Stihl 036 and 036 Pro

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fettlst

ArboristSite Member
Joined
Oct 23, 2007
Messages
90
Reaction score
2
Location
Lexington NC
hi, i just bought a 036 pro project today. i was wondering the differences between an 036 and 036 pro. are the Cylinders and pistons different?
Thanks
 
I believe the only differences are that the 036 Pro has a decompression valve port drilled and tapped for the decomp valve in the cylinder, of course with the valve installed. Also the Pro version has an adjustable oiler.
 
All components on the two saws are interchangeable. As Bowtie said above, "Pro" saws that have the "Pro" label above the air filter, usually have the decomp button for easier cranking and an adjustable oiler with a screwdriver on the bottom of the saw. These are good 'work' saws; I've cut a lot of wood with them over the years.
 
Last edited:
Yeah unlike the 026 I believe both the 036 and 036 pro have adjustable oilers on them.

The 034 I just sold wasnt labeled Pro but had an adjustable oiler. I dont know if it was factory or not, but the access hole was in the saw to the oiler adjuster as well.
 
The main differences beteeen the 036 "pro" and 'not pro" are the decomp and compensating carb/larger airfilers/air-filter box.. All have adjustable oilers
 
Is the 036 a pro or not? If its a non pro its an earlier 036. Its hard to give a good estimate without getting a better idea of the physical and mechanical condition. How much is he asking for it and do you have a picture of it?
 

Latest posts

Back
Top