• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell 1/2" Chain

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ChoppyChoppy

Tree Freak
Joined
Jun 17, 2013
Messages
10,617
Reaction score
10,284
Location
AK
20141220_112343.jpg 20141220_112352.jpg 20141220_112412.jpg 20141220_112420.jpg 20141221_170129.jpg 20141221_170140.jpg 20141220_112343.jpg 20141220_112352.jpg 20141220_112412.jpg 20141220_112420.jpg

1/2" 0.058" NOS from the 70s-80s.
4 rolls, All new. Yes it's dusty, it's been sitting in the shop for 30+ years.

Have been offered $2/driver, but I thought that was a bit much. I'll do $1/driver and ship normal lengths to anywhere in the US for free.

Brand new on the roll -
Oregon - almost full roll, about 88ft. I'll sell the whole roll for $650 shipped. That's about $7/ft. Roll won't come in the package, I'll spool it out into a flat rate box. (The spool is falling apart anyhow) I'll include the tie straps/presets I have (I think 2)

The first layer on the roll has a few spots 2-3" long that got some rust and the chain is stiff. I lubed it up and it seems to work loose, just would take a bit of TLC. The 2nd layer is all good.

Stihl - 64 drivers
Zip Penn - 96 drivers

Loops. These are $0.50 a driver, they are about 80% but sharpened as a rip chain for a mill it looks like.
Oregon, 62 drivers
M with a square around it (not sure what brand that is?) 62 drivers.
 
I found two links but we are hanging onto them. We have several dozen old saws that run 1/2" chain. Not that we use them, but still would like to make a chain if needed at some point.
 
Are there some posts from this thread missing???????????? It does not read very well so I am thinking some attitudes have been eliminated and thus tainted the thread
 

Latest posts

Back
Top