Mastermind Worksaw Shirts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
*Cope1024: One long sleeve XXL and a short sleeve XXL.
scallywag: Two long sleeve T's in gray, size Large.
*pcrevelli: Two XL pocket tees.
*bag-o-donuts: Two XXL, one of each color.
*Moparmyway: Two XXL long sleeve gray T-shirts.
Fishinfreak99: Three XXL long sleeve gray, Two XXL short sleeve gray, Two XXL short sleeve orange, One XXL long sleeve orange, No pockets.
*showrguy: Four gray pocket tees, Large
hseII: Four, large gray, w/ pockets.
*Rudedog: Two gray in short sleeve L, Two gray in short sleeve XL, Four gray in short sleeve XXL, Three orange high vis short sleeve XXL,
Three gray in long sleeve XXXL, Three High Vis orange in long sleeve XXXL
*Ray Bell: One XL long sleeved shirt with pocket, gray.
*Zero_sum: One gray T in large, One Large hoodie.
Stihl Livin: One xxl hoodie.
Pud: Two medium shirts, One large shirt and One medium hoodie.
*hanniedog: Two XXL pocket tee-shirts Hi-Vis orange.
*Time's Standing Stihl: One XXL Long Sleeve Hi-Vis.
*Roll Tide: Two Large short sleeve shirts.
mcginkleschmidt: Two XL short sleeve gray.
CR500: One XXL SS Orange. One XXL LS Orange.
*glock37: 2 XXL Pocket T Shirts in gray. One XXL Hoodie.
KG441c: One XL short sleeve.
*Big_6: One gray, long sleeve XL, One gray, short sleeve XL
*HusqyStihl: Two pocket tees, Hi-Vis (size XL).
*psuiewalsh: Two Hi-Vis short sleeve Large.
dolmarkid: One Hi-Vis short sleeve XXL, One XXL gray short sleeve, One hoodie XXL.
*stihlx8: One large short sleeve hi-vis pocket, One large short sleeve gray, Four XXXL short sleeve pocket, two hi-vis, two gray.
*Adirondackstihl: One Large short sleeve gray.
*redoakneck: Two short sleeve XL Hi-vis.
PA Dan: One XL Grey short sleeve, One XL Orange short sleeve.
Fire8: One XXL Gray Short Sleeve.
*ncstihler: One Large SS Gray, One Large SS Orange.
*tickbitintn: One XL SS Gray, One XL SS Orange.
bryanr2: One XL SS Gray, One XL LS Gray, One XL SS Orange, One XL LS Orange, Two XL Hoodies.
bowtechmadman: One XXL Grey LS (no pocket), One XXL Hi-vis LS (no pocket).
*nixon: One grey, & one hi - vis orange in XL, short sleeve, no pockets.
Duane(Pa): One long sleeve, orange shirt no pocket XL.
*Jon1212: One XL pocket tee, and one Medium regular tee, Gray.
fin460: One XL pocket tee, One XL LS with pocket, Gray
*Perry pioneer: Two XXL long sleeve pocket Tee's 1 hi vis orange, 1 gray
*bullrider: One XXL LS with pocket, One XXL SS with pocket, gray.
*Jose A.S.T.S: One Large SS, One Large LS Gray.
*50blues: Two XL SS with pocket Gray.
*Definitive Dave: One SS XXL gray, and One SS XXL orange.
*Bilge Rat LT 20: One Large pocket Tee gray, One XL pocket Tee gray.
svk: XL SS Gray
*Paragon Builder: Two large long sleeve pocket tees in orange.
Grenock: Two SS XXL No Pocket Gray. Two LS XXL No Pocket Gray
 
Not really........but that's a good ider.

I ordered the shirts after the pre-sale time was over..........they are being made now.

It wouldn't really be a custom order any other way now would it? :laugh:
There's always next year.[emoji106]
 
If anyone falls through on payment and you end up with extras, give me a shout. I could swing another payment your way for a couple more collectors items :clap:
 
I did order extras in the most popular sizes.

After everyone has their shirts I'll post up about the ones I have left over.

Hey........I appreciate y'all being patient here. We had no idea so many shirts would sell. Just the shipping is gonna be time consuming as all get out.
 
Hey, I was cutting on Fri and it was so hot and humid that at lunch time I had to come home and change my shirt, WHICH IS WHY EVERYONE NEEDS AT LEAST TWO MONKEY SHIRTS! Was nice to take the wet one off and put the dry one on, but at the end of the day they were both the same.

On another note, since I leaned that new recipe 044 out a little bit, it has been surprising me how strong it is. Nice job Randy, I like it! Amazing how much difference leaning the tune a little makes.
 
Tune is everything on a ported saw. Next to that is chain.

I can't tell you how many times I've heard the same story from a GTG ...........

So and so's stock saw beat a ported saw built by a "saw builder". OH MY :eek:

When that happens I almost anyways figure that tune and chain is the reason. All the guys that build saws for customers these days are pretty damn good at it. But you'll still hear about his saw beating my saw, or vice versa. If you are gonna be running ported saws.........you need to learn how to tune, and file.

Anyway.......

I talked to my shirt guy on Friday. He is a bit behind on orders. This order is a big one for him too. He is on it though........they are coming soon. :)
 

Latest posts

Back
Top