Ms461 Raffle for breast cancer

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It is www.paypal.com

Be sure to follow these instructions

Donations - donations can be done via paypal or if you'd like to send a check/cash please contact myself Eric @malk315 or@Paragon Builder Dan. The paypal address (use Friends and Family please to avoid fees) is [email protected]PLEASE PLEASE include your AS username and real name in the NOTE section of your donation (and nothing else, paypal may have a hissy if they find out its for a raffle)

just donated. no "notes" available when doing so. was to f&f.

email/acct is similar to username here.
 
Hi guys, great cause here.

I am planning to buy some tickets, and took a quick read through the posts. The title says a 461 is being raffled, but I don't see it listed in the prizes.

Did I just miss it?

I wish the best to the family in need.

Thanks,

Brandon
 
Hi guys, great cause here.

I am planning to buy some tickets, and took a quick read through the posts. The title says a 461 is being raffled, but I don't see it listed in the prizes.

Did I just miss it?

I wish the best to the family in need.

Thanks,

Brandon

Hi Brandon,
I was going to sell my friends 461 to help him out. Some others had the idea to donate/ raffle other stuff and let him keep his Saw. So the 461 is not being raffled.
Dan


Sent from my iPhone using Tapatalk
 
Hi Brandon,
I was going to sell my friends 461 to help him out. Some others had the idea to donate/ raffle other stuff and let him keep his Saw. So the 461 is not being raffled.
Dan


Sent from my iPhone using Tapatalk

Thanks for the info..... either way, I am in!

Come on port job or new saw!

I hope all goes well for the family, my wife and I are headed to the Mayo Clinic and then to Massachusetts General to see more specialists the week of the drawing, so we feel their pain. Hopefully we get some answers this time.... and win something cool in the same week.

Brandon
 
I believe we are at $2925 total on this -- very close to $3K.
I'll shortly export the paypal data and make a proper spreadsheet to account for everything so we're in good shape to assign tickets for the drawing on Sept 3rd.

A couple of donations paypal ended up charging a fee -- no big deal I'll cover the fees as they aren't much, but now I can't simply just look at my paypal balance to get a rough idea.

Folks that have sent checks / money orders -- I haven't deposited them yet, but will try to soon.

Cheers.
 
Tonight's Update -- I finally exported all of the paypal data to a spreadsheet and consolidated all of the checks even the one check that went to Dan and have everything accounted for. We're getting close to the drawing so I want to be ready.

Total Number of people who donated: 76
Total collected: $3695

At this rate we could hit $4K Wow. Great job everyone!
 
Update: Added Prize #17
Raffle extended to Sept 3rd/4th drawing date

How it works
- for each $10 donated you get your name entered into the pot. For example: $100 = 10 entries/chances/name thrown into the fish bowl.

End date/drawing - To be entered into the drawing/raffle. You must have your donations in by midnight Sept 2nd. The drawing will be done Sept. 3rd or shortly after.

Donations - donations can be done via paypal or if you'd like to send a check/cash please contact myself Eric @malk315 or @Paragon Builder Dan. The paypal address (use Friends and Family please to avoid fees) is [email protected] PLEASE PLEASE include your AS username and real name in the NOTE section of your donation (and nothing else, paypal may have a hissy if they find out its for a raffle)

PRIZES!!! special thanks to those who have donated prizes!!!

1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

2. Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

3. Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @czed from O P E site

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

6. Husky 262XP rebuilt and work ready with optional port work (winners choice) from @Paragon Builder

7. Muffler mod by @MillerModSaws (you send muffler to Carl, @svk will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk

8. Makita/Dolmar DCS6421 saw -- see pictures in thread on O P E site from @astnmacgto

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures on O P E site. 38-35" waist with 32" length.

10. Woods port from Mastermind Worksaws. @El Moobs


11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready from @Poleman Pictures are in the post on AboristSite.[/QUOTE]

12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains. from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman

14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @MillerModSaws

15. Custom built benchmount chainsaw vise from @mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. from @Dahmer

17. Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. Pictures are in the thread on O P E. A great prize from @Definitive Dave

 
pics of the Starter tool kit
IMG_1592.JPG

OEM Stihl: toolbox, long tuning screwdriver, T27 t handle, coil gap gauge, exhaust block offs, carb tuning wheel, piston stop, piston install kit, exhaust block flange
OEM Echo/Shindiawa: fuel ethanol tester, spark plug pressure vac adapter, compression tester with 10mm adapter, Jonsered tuning screwdriver, Mightyvac MV8255
Angry Elf Engineering: Universal case splitter
Oregon: bar rail cleaner and chain/bar tool
DTI - 20K tachometer - wired and wireless
NWP - screnches and T-handle wrenches
Farmertec - clutch spring tool, flywheel pullers and piston stops, decompression port plugs
some random medical supply house - intake and fuel line occlusion clamps
Zama china warehouse - 6 piece carb adjuster tool set

USA shipping is on me, non US shipping I will take care of the first $15.00, the rest is the winners responsibility

CANCER SUCKS!!
 

Attachments

  • IMG_1593.JPG
    IMG_1593.JPG
    1.4 MB · Views: 11
  • IMG_1594.JPG
    IMG_1594.JPG
    1.5 MB · Views: 12
  • IMG_1595.JPG
    IMG_1595.JPG
    1.6 MB · Views: 11
pics of the Starter tool kit
View attachment 598871

OEM Stihl: toolbox, long tuning screwdriver, T27 t handle, coil gap gauge, exhaust block offs, carb tuning wheel, piston stop, piston install kit, exhaust block flange
OEM Echo/Shindiawa: fuel ethanol tester, spark plug pressure vac adapter, compression tester with 10mm adapter, Jonsered tuning screwdriver, Mightyvac MV8255
Angry Elf Engineering: Universal case splitter
Oregon: bar rail cleaner and chain/bar tool
DTI - 20K tachometer - wired and wireless
NWP - screnches and T-handle wrenches
Farmertec - clutch spring tool, flywheel pullers and piston stops, decompression port plugs
some random medical supply house - intake and fuel line occlusion clamps
Zama china warehouse - 6 piece carb adjuster tool set

USA shipping is on me, non US shipping I will take care of the first $15.00, the rest is the winners responsibility

CANCER SUCKS!!

Damn this is a good prize Dave! Thank you very much!!!


Sent from my iPhone using Tapatalk
 
Back
Top