Search results

I researched and came up with the K-15 also. I dont know what the differance is between the two either. Thanks for the reply.

This saw has kicked my --- today. I needed to rebuild the carb and got a kit. Installed it and have messed with it all day. I can get the saw to run for a minute but it is hard to start, smokes, or just floods out. The carb is a walbro WJ-69. I got a kit from baileys and they gave me a kit and...

This was stupid but it makes me think when I am cutting with someone else now. I was cutting with 2 friends and one of them was bucking a log behind me. I was not paying attention to the others and was in my own world, only thinking about what I was going to cut next. I stepped back and...

to be honest I aint picky, what ever is on sale.

thanks HOSS I looked at the site and it says "McCulloch MAC-9 Flatback carb kit!" and the carb they used had MAC-9 stamped on it, and the person selling them does not know what it will fit. So I am asking you will this kit fit my carb? [/URL][/IMG] maybe the pic will help you.

i dont know what you mean by flat back. I am not that familiar with mac saws. The only numbers on the carb are 63682 and it is flat on the bottom with four big screws on the bottom plate. Is this a flat back carb or something else?

yes the 895 is a beast to say the least, the carb took a sht on me but once i can find a kit it will be back in the game. I love the look on peoples faces when they see and hear that monster in wood. One day when I have the money I would like to change it to 404 and run a very big bar on it.

895 with 066 for scale. The pictures don't do the 895 justice. [/URL][/IMG] [/URL][/IMG]

I great results with OREGON chain from baileys. The 75JGX its round skip chiesel. The key is to keep it sharp.

Thanks for all of the reply's. Yes trailer brakes are more than a must, I don't have to haul it all at once its just if I can its that much less fuel and that means more $$ for me. Now if I can get some time off work I will haul the wood and report back when ever that may be. Thanks Nick............

Yes' if you are going to cut wood you must know how to sharpen your chain by hand. I have been doing it for 3 years now (Don't sound like much) but am very meticulous about it and yes I ave F'ed up many chains.Now I even touch up factory chain before I use it with great results, the key is the...

I have 3 cords of oak that has been split for 1 year lined up and sold. my question is can i haul 3 cords with a new 3/4 ton duramax or 3/4 ton dodge with a trailer? the trip is 90 miles with one steep grade after that its smooth sailing at 55 mph.. I do know how to drive with a trailer do i...

another problem I had was the av mounts. After cutting for a day I noticed that there was a lot of movement from them, I think that the 42'' bar and using the dogs a bit may have torn one of them. Do they make stronger mounts for bigger bars?

I just got the thing put together and ran it this weekend. I helped a friend cut a pine tree up. We did not have a tape but my 42'' bar didn't get all the way through in parts of it. The 066 loved it, the people there where in ow at how it cut. I felt a tingle in my pants as it was buried and i...

I have tried to find a velocity stack with K&N filter for sale online or even a phone number that I can call to order one and can find nothing. Can any of you help.

I have researched the part numbers but want to verify with the experts at this site first befor i order. The people at my local Stihl shop are not that knowledgeable and i don't trust them so i am doing the homework my self. I have a 36'' bar # 3003 000 7353 .404/.063 To change it to 3/8...

im not a profesional logger or arborist but i cut a fare amount of firewood every year and fall a tree or two when i get the chance, and when i first got into the chainsaw addiction i thout i would save some money and get a "home owner" saw since i wasnt cutting wood day in and day out. the saw...

i live in northern California. i cut a lot of firewood and i want to try carving with my saw. what would be a good wood to use to carve with? i have been looking at the posts in this forum and the carvings look very nice to say the least. you guys seem very knowledgeable and do beautiful work to...

i like M715's. i just got done stuffing a 454/465/NP 202 in mine. they are the meanest looking trucks that i have ever seen.

i have to say it to. i love to deal with Baileys, they are easy to talk to, they have fast shipping, and the mechanics are very knowledgeable and do everything they can to help, and even call you back when they say they will which is great.