Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Marshy

    Convert 192TC to a 192T?

    Can anyone confirm if you can put the 192T rewind guts into the 192TC rewind cover to eliminate this POS easy start system? The IPL shows a different part number for the rewind covers. T Rewind cover P/N: 1137 080 1800 TC Rewind cover P/N: 1137 080 1801 Someone said the TC might have a deeper...
  2. Marshy

    Wood ID

    Need some wood ID help. Location is Kentucky, not sure what it is... thanks. Paging @ATH.
  3. Marshy

    Fungus Prevention on milled lumber

    Anyone have a preference on brand or chemical they use for treating their milled lumber to prevent fungus growth? I'm thinking something water soluble so I can use a weed sprayer for easy application.
  4. Marshy

    Sold Blaze King - King Ultra

    Looking to sell my Blaze King, its a King Ultra model with ash pan. I will include the double wall DVL pipe with the sale which includes a 24" straight, two 45 adjustible elbows, a 12" telescoping adjustible section, and the masonry thimble connector. Asking price is $4000. Willing to negotiate...
  5. Marshy

    Helping a coworker

    Hi guys, thought I would make a thread to share the progress my co-worker is making on milling a tulip popular I took down for him. He's kind of novice to begin with but is a fast learner. I got him hooked up with a 394XP and a mill. I took down the popular at the edge of his property and turned...
  6. Marshy

    Remote Throttle

    Hi guys, I'm looking for a clamp-on type throttle lever that can be controlled via cable and remove handle for milling. Is there anything off the shelf that is reasonably priced and durable? I've searched the internet and see this question get asked a thousand times but all were custom made...
  7. Marshy

    Are You Insured?

    A few times a year I end up taking down some trees for some side cash. Some are near residential but some are on private property and used for firewood/lumber. So far the residential ones have all been straight forward and low risk. I plan to continue doing it as a hobby and it also helps...
  8. Marshy

    Show your support for caddguy

    Guys, without getting into the details I wanted to start this thread to give some support to @caddguy and his wife. Sending prayers you way man.
  9. Marshy

    Bar sizes between 42-50"?

    What bar lengths are available between 42" and 50" for D009 mount, 3/8, 0.063 gauge? Does anyone make a 48" bar with those specs or is it 42" or 50" only?
  10. Marshy

    Want to Buy 48" D009 Bar 3/8

    I'm looking to buy a sprocket nose 48" D009 bar setup for 3/8 and 0.063 chain. Is there even any 48" bars made? I can't seem to find any. Thanks
  11. Marshy

    Want to Buy Honda XR650R Street Legal Near NY

    I figured this is a long shot but Im searching for a street titled Honda XR650R for sale. I'd be willing to travel to a neighboring state of NY for the right bike. Let me know, thanks.
  12. Marshy

    Milling with Full House Chain?

    Has anyone ever tried milling with 'full house' chain? I'm interested to hear your experience with it. If you have no experience with it please say so, I'm still interested in hearing how well you think it would work.
  13. Marshy

    Woodstove Efficiency Debate

    Calling @Whitespider! Spidy's been asking for it so let's make it happen. Put your big boy pants on everyone and don't forget your knee high boots, this thread will likely get deep. There'll be some math involved and some bickering Im sure but lets keep it civil. For the folks who like a good...
  14. Marshy

    Measuring Chimney Draft

    My Blaze King manual called for 0.05" of water column for draft. Im familiar with using a monometer to measure the draft in HVAC but its generally a lot more than 0.05"! Anyone know the proper tool and way to measure chimney draft? My new King is a little sluggish and I want to measure it and...
  15. Marshy

    Freehand Milling

    This should be interesting. My wife found this hard maple log in town and told me I should go asked if I could have the wood. They people were nice and said I could. They said they had it taken down and assumed the company was taking the trunk too. It is a yard tree so I run the risk of hitting...
  16. Marshy

    Portable Band Saw Service

    Hi guys, I'm cutting some white pine for a guy that plans to have it sawn into lumber. He has a local guy that he can take the logs to for sawing at $225/1000 bdft. The other option is to have a guy bring a portable band saw to his location and saw it at $350/1000 bdft. I believe round trip...
  17. Marshy

    Want to Buy Hardware for 285/2100/2101/298

    I lost some hardware when it vibrated out of my 285. I'm in need of 2 screws that hold the recoil cover on. I guess I should have used blue locktight. Let me know if you have any.
  18. Marshy

    File Angles for Pine

    I haven't cut a whole lot of pine before. What angles do you use when filing you chain, same as hardwood but lower rakers? For hardwood I typically have 30* top plate and 10* down on side plate on full chisel round filed chain. Discuss.
  19. Marshy

    Indoor Close Clearance Pipe

    I'm getting ready to buy some double wall indoor pipe to hook my Blaze King. I went to my local woodstove store and checked their prices and had a little sticker shock. I googled the DVL item numbers and found it much cheaper online with free delivery. Just wondering if anyone has any...
  20. Marshy

    Sold Mopar 440 & Torqueflite 727

    I have a '76 Mopar 440 and Torqueflite 727 from a larger flat nose motor home that I am selling. Engine is stamped 6T 440 E, which makes this a '76 with a cast crank. Open to offers and trades but will not deliver. If serious enough I could try to ship it but have never done so with something...
Back
Top