Search results

Bump for Dallas

Not really, we are busy with the Pride Parade to support Dallas

Ummmm, I can not see a single reason to leave my Norwegian bunkers.

Thanks, Steve Yes, it has a cat. I've had 3,242's that came with cat, but I've never seen a 246 with cat other than the one I have. The cat comes with some pluses and minuses, the bracket sits with 6 screws, 4 for the muffler and 2 for the crankcase, on the bracket sits the catalyst, a 1 minute...

I bought this a few years ago, I am owner number 2. She goes nowhere. 246G is a bit cool to own, one of the models that Husqvarna never had part number for the G decal. I use this 246 partly in summer time, slightly modified, that is, ported, mm, advanced timing. In my opinion, 246...

23 RS Pro, it’s Stihls new NK chain.

Stihl 23 RS Pro for clean wood, Husqvarna SP33G for dirt wood. For 60cc and up, Husqvarna C85 chain. If rumors are correct Husqvarna is working with a new 325 58 ga full chiesel chain. Would not surprise me if they’re also working with a NK full chiesel chain.

Far as I know the 44 clutch cover wont fit. Not sitting with them right in front of me but if my memory is correct the brake band is also bigger on 44.

well, 346 was not a replacement for 242 and 346 did not take 242’s place in the lineup. Have you ever run a 242 vs 346 in spruces?

I use 390 clamp. Moumt the boot to the jug piece by piece. 1) Bellow 2) Partition wall 3) clamp 4) elbow. 5) impulse hose not sure whitch one had most issue, plastic boot or metal clamp boot, I’ve seen my part where the bellow impulse channel was damaged when Husky mounted the boot at the...

nope

And no, 346 was not a direct replacement for the 242xp. Husqvarna never made a replacement for 242, and they’ll never made a saw like 242 again.

If you own a farm in Scandinavia where the generation before us planted the farm full of spruces (and yes those farms exist) and you somehow want to take field by field with your own chainsaw (instead of hiring in a company with a couple ponsees), there isnt a chainsaw who beat a 242 in such...

543XP will be a perfect saw for you

Hi Matt, The only difference from a 346/350 pump to a 357/359 pump is the pump piston. If my memory is correct the piston is cut in a different angle so the pump will pump more oil pr rotation, otherwise it’s the same pump piston. 340/345 had a non adjustable pump, the pump piston is secured by...

Hi Steve. They used the same oil pump on 350, 346, 351 and 353. Be aware that Husky updated the pump for the better on their NE. The other thing you need to pay attention for is that 350 had a unique worm gear. If your thinking to update a 340/345 all you need is to remove the pin in the...

Flat is good, but lapping to 1000 grit is, well, not anything I would do on a chainsaw. Personally I just sand over the surfaces with a 240 grit, max 360 grit, most sealants need to have a tad ruff surface to bond properly.

I collect on one model, all the other saws I either keep them for awhile or I sell them asap. 346, 550 doesnt stay long nor do 357. While there isnt much to earn on 550 & 357 the same cant be said about 346 & 353, they always provide me with earning.

You're right Steve, there isnt much in common 130/135mkII vs 435/440. My 135 from year 2012 share alot with the 435 mark II