Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. blsnelling

    Inside the MS151T - MS150 vs MS151

    I love my little MS150 but was curious to see how the newer MS151 was different, or even possibly better. Interested in the condensed version? The MS151 looks to be identical to the MS150 with only a couple small exceptions. The 151 is said to have a domed piston. I won't be tearing it down...
  2. blsnelling

    51.4mm 372XPW Topend

    Has Husqvarna discontinued both the piston and the cylinder? I'm trying to located just a piston, with no luck so far. The piston is PN 503976171.
  3. blsnelling

    RIP: Nik aka Fatguy

    It's with great regret that I have to tell you that our dear friend Fatguy, Nik Tesla, passed away suddenly today. He was a dear friend, the kindest man I ever knew!
  4. blsnelling

    Tornado cleanup - Dayton, OH - MS500i - MS462C (Gutted and Not)

    20 tornadoes went through Ohio on Memorial Day night, with most of those being in the Dayton area 25 miles north of my place. One of them was rated an EF4. I went up last Saturday and then again today to help with cleanup. Today was a bit more relaxed, so I was able to get quite a lot of...
  5. blsnelling

    Inside the Stihl MS500i - SNELLERIZED Style

    I finally got my grubby hands on one of these bad boys. It showed up yesterday, straight off the boat from Greece. I wasn't feeling well last night, so tonight was the night. The first two things I noticed was that it started in only 4 pulls and had instant throttle...
  6. blsnelling

    Sold Stihl MS241C

    For sale is a very nice, low hour, Stihl MS241C chainsaw. This was a demo saw for Bryan Equipment, our regional Stihl distributor. I have modded the muffler and advanced the ignition timing. It is otherwise stock. The saw is very clean and runs great, with amazing power for such a small saw...
  7. blsnelling

    MS241C Discontinued 2+ years ago?!

    Really? That's what my dealer just told me after talking with his sales rep from Bryan Equipment, the area distributor. I guess if you want one, you'd better grab it now.
  8. blsnelling

    NIB Stihl 044 !!!

    It's hard to believe something like this still exists, yet here it is...a brand new in the box, never fueled, 10mm 044 chainsaw! Check this beauty out!
  9. blsnelling

    Inside the MS462C - Snellerized Style

    Yes, you read that right. I'm coming out of retirement to see what's up with this new Stihl saw. I've been anxious to get my hands on one for months and the time has finally come. I will be doing before and after vids. I won't be able to run it in until Friday at the earliest, so this is...
  10. blsnelling

    Want to Buy 046/MS460 Rear Handle/Tank

    My BIL has a 046 that needs a new rear handle/fuel tank. They are back ordered at my dealer. Does anyone know where I can get one or have one in excellent condition?
  11. blsnelling

    Want to Buy Misc Husky 350 Parts

    I'm looking for the following parts for a Husky 350. Clutch drum and bearing Clutch Cylinder cover wo/ purge bulb.
  12. blsnelling

    Want to Buy Misc 372XP Parts

    I'm looking for the following 372XP parts. Clutch drum Oil pump wheel gear Brake lever Chain brake cover
  13. blsnelling

    Want to Buy 372XP Crankshaft

    Does anyone have a good used OEM 372XP crankshaft for sale?
  14. blsnelling

    Online Husky Parts Source

    I thought that I had started a thread on those last year but can't seem to find it. What is the best online source for husky parts? I have used Jack's Small Engines for years but my last couple of orders have taken several weeks. I have a $350 order to place and would rather not have to wait...
  15. blsnelling

    Remembering why I LOVE the 346XP

    I haven't had the opportunity to run saws much in the last couple years. I haven't even done much port work. Between burnout and health issues I've pretty much quit working on saws. However, a commercial customer of mine bought a saw that I built a couple years ago and said it wouldn't rev...
  16. blsnelling

    Diagnosing An Air Leak

    This is a commercially used 346XP that I built several years ago. It's seen a lot of heavy use. The customer stated that it idled high an a new carb didn't help. When I got the saw I fired it up and played with the tune. It idled a little high, but not too bad. More significantly, the low...
  17. blsnelling

    028 Case Gasket

    Where can I get one? I ordered the OEM gasket set and it's NLA. I then order individual gaskets and now the case gasket is either NLA or on back order. I've looked online for an aftermarket gasket and can't even find that. I really don't want to make my own. Any help would be appreciated.
  18. blsnelling

    Bought a new saw today!

    Hahaha. Made you look :) I thought $5 was a great price for a wall hanger.
  19. blsnelling

    Current Price

    What's the current price on Stihl PN 1122 030 2001?
  20. blsnelling

    Sold 288XP

    Here's a super nice 288XP. This saw is all OEM with the exception of a new Meteor piston and a jungle muffler. If you look close, you will see some touch up paint, but it is in really fantastic condition. These pics and vid were taken today. This saw is stock and is making 155 PSI...
Back
Top