Search results

1-1/2 acres of grass. Done the bagger and takes too long. Have an older 11hp giant vac. Need something bigger. Use my neighbors newer 13hp LW and it’s what I need. Just seeing if anyone has used Fradans as I can go that way for less than half the cost of LW. Sent from my iPhone using...

Hi all Time for a new blower. Looking at Little Wonder 13hp but also see a lot of 14-16hp Fradans available used. Anyone used both? I can get a Fradan needing a repower and put a new 16hp Honda clone and be about $500 vs a used LW 13 or 14hp for about $1000. I have used the LW and know that...

The larger file doesn't fit into the holder unless you ream the plastic to make room. Sent from my iPhone using Tapatalk

Having made that mistake already the spacing of the bars that lay on top of the cutters is different. The 404 is too wide for the 3/8. Get the smaller one marked for 3/8. Sent from my iPhone using Tapatalk

Love it. Sent from my iPhone using Tapatalk

Pho won't matter at hd but they can usually do about $40 better Sent from my iPhone using Tapatalk

Big fan of the 2-in-1. Pferd CS-x is the same. Can get them for $34 on eBay. Sent from my iPhone using Tapatalk

Don't for get the rakers. Doesn't look like they've been hit in the pic. Sent from my iPhone using Tapatalk

Mine sits the same way though it started as an HD rental in good shape. I got it cheap after the tech couldn't start it with the switch in the off position. Fired first pull in the parking lot. Used 6421 $140 Used HD filter kit $40 84cc kit $110 Sent from my iPhone using Tapatalk

@Wowzer

keep an eye on the trading post for a Makita 6401/6421 with or without upgraded p/c. should be able to get one in good shape about half that price

i think its 1oz/gal for stabilizing... if you need a good clean, i would put 1oz in a half-full saw tank. as long as you have fresh gas with good oil mix, i believe you're fine. idle/run it for a few minutes to get the treated fuel into the carb let it sit for the week next weekend fire it up...

And I walked right into that one....... Sent from my iPhone using Tapatalk

I use sea foam as my stabilizer in my jugs. Then I'll add my oil mix to that. It's in every tank. Sent from my iPhone using Tapatalk

Yes just check squish. I needed an extra 0.05" with OEM. Sent from my iPhone using Tapatalk

Echo cs590 as others have said and don't look back. Or the home depot rental makita 6421 if you can scrounge one. Sent from my SCH-I535 using Tapatalk

Try the 7 and I bet you like it better. Sent from my SCH-I535 using Tapatalk

8x325 is slightly faster than 7x3/8 if the saw can keep up. My 036 pulled the 8x325 great. I grew up on an 029s for 20 years. Torque is more important than chain speed. If there is excess power for the bar size (think 20" on 046) you can think about bumping up the sprocket but if it's even...

No way an 8 tooth on an 029 Sent from my SCH-I535 using Tapatalk

Lots of beer on this project lol Sent from my SCH-I535 using Tapatalk