Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Merc1973

    Oregon Power Cut bar problems

    Is this Archer any good? I just purchased the same on Amazon now.
  2. Merc1973

    Oregon Power Cut bar problems

    Argh, you're right. A new chain fits nicely. Dang. Is a stock sprocket recommended or is there a Rim sprocket available?
  3. Merc1973

    Oregon Power Cut bar problems

    My new Oregon power cut bar for my echo 590 seems to be incorrect. It's almost as if the gauge is smaller than 0.05. The replaceable tip is the right size but the rest of the bar is not. Almost as if it is 0.043 as my Oregon 72EXL chain does not fit. Fits fine in original bar. And the side by...
  4. Merc1973

    Echo CS590, No Spark.

    I was jumping to conclusion is suppose. Compression feels good with hanging it by the recoil string. I do have a gauge too. I will dig into diagnostics further, I was limited on time this week. I'll post my findings. Thank you!
  5. Merc1973

    Echo CS590, No Spark.

    The saw has been an excellent Runner. The other day while leveling a stump I thought it had run out of gas since it was very low. It would not restart after refilling fuel. Even remove the plug to see if it had flooded. It didn't even attempt to start with a wiff of starting fluid. I just...
  6. Merc1973

    Upgrades to Echo CS-590

    Nice! Full chisel?
  7. Merc1973

    Upgrades to Echo CS-590

    New bar just arrived, grey instead of white. Nice and solid
  8. Merc1973

    How do i file these rakers/depth gauges

    I use this on LGX and EXL. Wonder if this will work too?
  9. Merc1973

    Upgrades to Echo CS-590

    Looks great, thanks for the info Brufab!
  10. Merc1973

    Upgrades to Echo CS-590

    I bought a like new cs-590 display model because of this thread 5 years ago. Been a great saw. I immediately did the MM, removed red limit caps to retuned the carb. Love the loud popping exhaust. I use oregon LGX and EXL and it just pulls like a beast. I just ordered a 20" Oregon PowerCut bar...
  11. Merc1973

    Where are you guys buying Chain?

    Full chisel 3/8, .050, 70 DL. I guess Im just being a Cheap ass, I should suck it up and pay the $22 per loop + shipping. LOL
  12. Merc1973

    Where are you guys buying Chain?

    Amazon doesn't sell Woodland pro anymore, only low kickback crap from oregon and Chicom junk. Baileys is out of stock. Prices keep going up... Argh!
  13. Merc1973

    What did you cut down today?

    Pulled out the 45 year old 031 to work on a poplar. Nothing huge. I forgot how heavy it was.
  14. Merc1973

    machinery marketplaces? anyone ever buy from them

    Bump for a helpful thread. This scam website is still up and running.
  15. Merc1973

    QuadraFire 4100i broken baffle board/fore board

    Thanks here is some ceramic board by Simvac. Ceramic Fiber Insulation Board 2300°F - 0.5 Inch X 11.8 Inch X 15.3 Inch https://www.amazon.com/dp/B075PCJCY3/ref=cm_sw_r_cp_tai_zLa6zbVDCJYW9
  16. Merc1973

    QuadraFire 4100i broken baffle board/fore board

    Sorry, I can't change the typo in the title..... I just cleaned my liner to get ready for the burning season. Upon removing the blanket and fireproof baffle board, one was cracked in half. It needs to be replaced, but at $140 for a new set.... come on. There has to be another option. I will...
  17. Merc1973

    Trash picked 038

    Man, you suck... Wish i could find decent saws in trash or cheap. Good find!
  18. Merc1973

    It's 2016 to hell with porting...

    Wow, the mods really cleaned up the thread! Nice work. It was a disaster, LOL.
  19. Merc1973

    '15 Echo CS620PW Information

    Mine was actually slightly too rich even with a MM. It was built in 2016, maybe Echo has caught on to the stock tuning? Or the Dealer I bought it from adjusted it...
Back
Top