Search results

I had this issue also, I couldn't get enough clearance for a traditional stove in my garage. I ended up finding a new pelpro pellet stove on craigslist for $100. guy said it wouldn't feed. All it ended up needing was the feed door switch bypassed. Bought a pipe kit and piped it out of the side...

good morning. I recently moved and my classic edge is now 100 feet away from the house. Can I instal the fire star WiFi controller on my boiler or does it require certain things? I read that it has to have a certain update, but I'm not sure how I find that out.

Ok thanks for the info. I was just thinking it may restrict it some but I guess I won't really know until I instal it and see. Sent from my iPhone using Tapatalk

So I'm getting ready to instal my CB350 at my new place. This instal is going to be in my heat pump. One question I have for the people that have the exchangers in their heat pump is. Have you ever noticed output issues once you instal the exchanger when you are running the AC side of the heat...

Ok sounds good. Thanks for the info Sent from my iPhone using Tapatalk

If I wanted to run a loop to my shop for a 130k btu heater. Would I just be able to get away with using the pump on the boiler? Boiler Will sit directly behind the shop so the run will prob be under 50 feet. I was thinking just run the loop with on off valves and splice return before the valves...

what kind of prices are the inserts. I cant find any price points online?

Just got done doing this today, I cut almost all the way down on the entire log. Change to my stump chain and cut them the entire way through. Don’t really care if I bury it in the dirt with that chain. Sent from my iPhone using Tapatalk

I’m on Braddock mountain. By Middletown. Sent from my iPhone using Tapatalk

Yeah that’s what I was thinking I can’t seem to find a reason why they went with a rubber seal. I’m going to call one of my local guys today and ask him what he thinks Sent from my iPhone using Tapatalk

I have a classic edge 350. Is their a reason they used a rubber door gasket on these? I’m wondering if I can replaced the upper door gasket with rope instead of rubber. The bottom ash door is a rope gasket? Sent from my iPhone using Tapatalk

When at looked at the spec sheet of each the only Difference I see is the 30 has a 15.5gpm pump and the 35 has a 17.5gpm pump. And a 2 gallon working hydro fluid difference. Sent from my iPhone using Tapatalk

Yeah im going to rebuild the other one. They sent it for free so I can’t complain about it. Sent from my iPhone using Tapatalk

Ok thanks for the info. It looks like the bore size is going from 5 to 5.5 when I measured. Sent from my iPhone using Tapatalk

Just went to replace a cylinder on my splitter. It’s a 30 ton unit. Opened the box and see they sent me a 35 ton replacement cylinder. Will this adversely affect anything on the machine If I put the 35 ton cylinder on a 30 ton splitter? Sent from my iPhone using Tapatalk

That’s about all I have burned in my boiler this year. And will probably be the same next year Sent from my iPhone using Tapatalk

Are you using any type of flexible ducting? Sent from my iPhone using Tapatalk

Just call this guy https://www.instagram.com/p/B7i88v_gLiM/?igshid=1q07weomx5gms Sent from my iPhone using Tapatalk

For any of the CB classic edge owners. In the bottom reaction chamber their is a shield that covers half of the heat transfer tubes. Mine has somehow became loose and falls down. So every time I open up the bottom chamber to clean it out I have to jam the shield back up with the clean out rod...

After owning something for 17 years, I don’t think I would have a problem putting 300 into it. Hopefully the new door will give you another 17. Sent from my iPhone using Tapatalk