Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Finnrpm

    Makita Dolmar Oil Leak Fix

    Those rubber hoses do shrink..... Had to insert a washer under that oil pump to delivery hose slot...... So it is raised a little to give a better seal....... RV
  2. Finnrpm

    Resistor and Non-Resistor spark plug

    Ordered from rockauto, plugs not made in japan, no "japan" text in the plug, box claims " made in brasil ". Now the price makes sense :( http://www.ngkntk.com.br/institucional/en/teste-1-titulo-para-post-imprensa/ Ordered denso w22mpr-u also from rockauto, they have " japan " on the plug &...
  3. Finnrpm

    Sach Dolamar 110. Specs, parts information needed

    Few pics of my 110.. Base gasket delete, timing advance & muffler mod, wood aspen, chain stihl RS .325 .050 / bar 13", setup weight 5.5kg / 12.12lbs RV
  4. Finnrpm

    Resistor and Non-Resistor spark plug

    NGK has same kind of plug BMR7A BMR7A on left / BPMR7A on right RV
  5. Finnrpm

    Resistor and Non-Resistor spark plug

    Seems that they have also denso W22MPR-U for bargain price......:) https://www.rockauto.com/en/parts/denso,6043,,0 RV
  6. Finnrpm

    Resistor and Non-Resistor spark plug

    Maybe, but using china made plugs are equally tempting as is visiting these gentlemen..... RV
  7. Finnrpm

    Resistor and Non-Resistor spark plug

    To save 73 cents a plug i would not even consider chinese plugs. Last order i made from huztl they put five plugs for free on my order........;) RV
  8. Finnrpm

    Rpm tunning

    https://www.arboristsite.com/community/threads/chainsaw-tuning-101.250802/ Just wondering why above thread is not in Chainsaw stickies? RV
  9. Finnrpm

    350 husky upgrade

    This kind of pricing is at least to me a no brainer......... http://www.hlsproparts.com/product-p/544 14 29-08.htm Here in Finland this kit would hit your wallet around 350 euros, that's about 430 usd......:eek: RV
  10. Finnrpm

    462 videos

  11. Finnrpm

    Bar oil in newer Stihl saws

    :wtf:........... This dude stalls it even with the synthplus oil around 5 min. from the start of the vid. And claiming that " all new stihl saws model number ending 1 or 2 need to use synthplus bar oil, cause it's way thinner" is total bs. Could it be that synthplus is not actually the solution...
  12. Finnrpm

    What tempature do you switch to winter chain bar oil?

    It doesn't....... until the oil has " melted " back to liquid. You can run your car engine surprisingly long after draining all engine oil. Same thing goes with frozen oil in cold weather. Oil leftovers will lube the parts, but it will cause wear on the engine.
  13. Finnrpm

    Broken bolt

    Drop ATF/acetone mix on it, grind a slot in the middle of it, let mix to penetrate overnight. Then it is the last charge with suitable flat head screwdriver. And some serious heat will not hurt if the oil mix won't loosen it. Good luck!!! RV
  14. Finnrpm

    395xp: Replace clutch or clutch springs?

    Yes, good use for old starter rope leftovers......;) RV
  15. Finnrpm

    395xp: Replace clutch or clutch springs?

    If your clutch shoe is worn below 1mm, it might strech your clutch springs faster. Also clutch drum inner diameter increases over time. Causes same result in the end. This is good reading..... http://www.madsens1.com/saw_clutch.htm RV
  16. Finnrpm

    The bar and chain

    You should have a rim sprocket clutch drum on a husqvarna 545. Original rim should be a SM7 ( small 7 spline ) 7-pin rim sprocket, oregon pn: 11892. For faster chain speed you can try for 8-pin rim sprocket, oregon pn: 11891. This could be a good choice if using nk-.325 chain. Oregon speedcut...
  17. Finnrpm

    The bar and chain

    Sprockets handle drivelinks all the same, if you have a spur sprocket in place might be a good move to change to rim sprocket drive...... Saves money also in a long run. Sandvik bars are NOS, in Finland i have not seen those bars on retailers for a long time. Not sure but got a feeling that...
  18. Finnrpm

    The bar and chain

    https://saegenfuzzi.de/SUGIHARA-Fuehrungsschiene-45-cm-15-mm-StarTip-Standard-325 Ordered a sugihara bar for my 025 from this site and other saw stuff also. No complaints. I don't need sugihara bar, but i wanted one!! :)
  19. Finnrpm

    Whats your thoughts on these little buggers?

    Over here in Finland 241c-m are sold for 599€ ( = 910 AUD/ 699 USD ) and 261cm is 699€ ( = 1062 AUD/ 815 USD), so it should be no brainer to go with 261cm.........
Back
Top