Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. KennyPete

    Sold 10mm Stihl 044 $450 shipped

    I picked this up at an auction last year. Only selling because I finished my ported 461 project and I don't need it. Has 150lbs compression, good runner. Pulls a 32" bar and chain with ease. Has a 066 air filter cover and a 440 handle, but otherwise it's an original 10mm saw. I haven't done...
  2. KennyPete

    Beware Husqvarna 350 cylinder kit from CustomChainsawParts on eBay

    I purchased this kit to throw in a buddy's 350. When I received it, the port castings were rough so I cleaned them up a little with a dremel. Assembled as normal, no run, <90psi compression. Passed vacuum test. Took it apart. Removed base gasket and measured squish @ .032 - reassembled...
  3. KennyPete

    Sold Jonsered 2095 - $550 shipped

    I bought this as part of a lot at an estate sale. The bad: It had a crack in the muffler, so I welded it shut. The pull rope was short so I replaced that as well. The chain brake does not function. It's a little ugly. The good: Strong runner. ~155psi compression. Runs/Cuts/Oils as it should...
  4. KennyPete

    Want to Buy Stihl ms193tc ignition coil

    As the title states, looking for a 193tc ignition coil. Dealership wants $90.
  5. KennyPete

    Sold Husqvarna 266 - $200 + shipping

    I took this on trade for an MS250. Saw was too heavy for its previous owner who is in his 70's. I traded him a MS250 straight up for it. Strong running saw, 20" bar and chain, needs cleaned up & new stickers if you want them. I will pull muffler and take pics & get compression numbers tomorrow...
  6. KennyPete

    Want to Buy MS441 muffler

    I got a saw in where someone did a hack job muffler mod that melted the chain brake handle. No fixing it. Need another, dont feel like paying $65 dealer price
  7. KennyPete

    Help identify this old Jonsered

    Had a guy drop this off to get repaired. No coil on the saw. No plate or stickers to identify the model either. Guy believes its a 930. Any info on something I can do to confirm this? Cylinder measurements etc.
  8. KennyPete

    Want to Buy Blown MS460 or 660

    I have a significant pile of 460 & 660 parts, looking to put together a runner for my neighbor. Let me know if you have anything. Doesn't have to be pretty.
  9. KennyPete

    Want to Sell Husqvarna 371 and 455

    Husqvarna 371 - 20" bar and chain - decent used condition - Starts/Runs/Idles/Cuts like it should - OEM Bar was stripped, rails filed and straightened, then repainted. Chain is sharp. Asking 350 + shipping Husqvarna 455 Rancher - 20" bar and chain - decent used condition -...
  10. KennyPete

    Sold Echo 702VL

    I dropped a tree for an old guy down the street the other day. I didnt ask for anything but he handed me this saw as payment. Guy Bought it new in the 70's. Its still a great runner. Everything is there. 70cc's and a 20" bar & chain. Make a decent offer and its yours.
  11. KennyPete

    Want to Sell McCulloch Mini Mac 35

    I was driving home the other night and noticed an elderly neighbor out in her yard trying to trim a limb off a tree with a hand saw. I grabbed my little 200T and walked down there to offer her a hand. She was babysitting her great grandson and he was trying to climb the trees in the yard...
  12. KennyPete

    Chainsaw meets Miter Saw

    I have a small machine shop, and I occasionally get odd requests. This one came from an Amish/Mennonite Fellow (wasn't sure, wasn't asking). He was working out of state with another crew and they had a miter saw that was retrofit with a Stihl FS130R motor. He said they paid $2300 for it, and...
  13. KennyPete

    Improving the Harbor Freight Chain Grinder

    I was given a harbor freight chain grinder yesterday, so I figured I would tinker with it and see if I can improve on it a little before passing it on to someone else. Out of the box it's what you would expect from Harbor Freight. It works, just not very well. So here is my less than 2 dollar...
  14. KennyPete

    Want to Sell Stihl MS361, MS440 - Husqvarna 455 - Poulan Pro 5020av

    Every saw has been cleaned, serviced, bars dressed, and the chains sharpened. They are all ready to go to work. Prices do NOT include shipping. More pictures, compression ratings, etc available upon request. Poulan Pro 5020av - 50cc - Has a 20" 3/8 Bar & Chain. Excellent condition, runs and...
  15. KennyPete

    Sold 36" Husqvarna Bar and Chain - $60 + shipping

    36" Husqvarna brans bar and chain. Chain is 3/8 by .050 Full Chisel and is like new. Only ran for about 15-20 test cuts with a customer's 395. Bar had some cosmetic wear, so I stripped it, touched up the rails, and repainted it. Asking $60 + shipping.
  16. KennyPete

    Want to Buy Top handle saw

    I am looking for a top handle saw. Something like a MS192t. Budget is $200 or less shipped. Going to be a gift for my father in law since he keeps borrows my MS200T at least once a week.
  17. KennyPete

    Please help identify this saw

    A friend brought me his dad's saw and I need carb gaskets for it. It's a Sears Best Craftsman Turbo 2.5 - Haven't been able to locate the plate with the model or serial # From what I can tell it's the same as a Poulan 2500 - can anyone confirm this? Thanks in advance!
  18. KennyPete

    Want to Sell Husqvarna 455 Rancher Carburetor - $20 + Shipping

    Replacement part # 503282101 Carb was cleaned + new gaskets Customer originally brought me the carb for a cleaning + new gaskets. He put it back on the saw and it still wouldn't run. Had him bring me the saw. Only had 110lbs compression, so I bought the saw for parts and stripped it. I can...
  19. KennyPete

    MS192TC Giving me some crap

    I got 2 of these little buggers (not running) on a trade for a used Poulan p3816. Pulled the poulan out of a neighbor's trash, cleaned the carb, and it was good to go. So no money loss on them other than a couple carb kits. My problem is the saw takes off, even with both chokes on, and will not...
  20. KennyPete

    Sold MS361 needs minor repair

    This came in to my shop on a trade for a working 362. It needs: 1.) Air Filter Housing 2.) Carb Gasket Kit 3.) A gas tank cap 4.) New badge if you want it Thought I would throw this out here before I start...
Back
Top