Search results

Will you ship to ottawa canada

I will measure later and share Assuming most ppl don’t prefer the Bakelite type seals over standard type

I’m working on a few 540xps One of them I didn’t do a press and vac test on, The saw runs and cuts but will have a idle change if put on its side Thinking crank seal, I have some farmertec ms 200 crank seals, the metal type with rubber They look the same soze As well as I tried some ms200...

I got a few parts saws from a tree company Seems like all of them had the mufflers fall off and melt up the tank bottom as well as mess up the exhaust port The mufflers are cracked as well I tried brazing them and as well the holes are flared outwards Looking for some replacements

Picked up 4 parts 201t saws 3 turned out to be m tronic and one just the 201t Looking for a Ipl and service manual for the m tronic All the mufflers seem to have come loose on these arborist saws, and possibly stripped the bolt holes in the cylinders

It wouldn’t spin backwards due to the starter pawls engaging

2015 550xp Was sceptical at first for the price Good deal?

I’m working on taking parts from a 346xpg and a 2145 and using them to make up a 2149 of my liking. I have noticed that the jonsered cylinder bolts are a type of coarse thread and vs husky the normal fine thread Gotta be careful as they don’t interchange

Ordered the Oregon tip and fit !

Also what do ppl do to make the bar like that, seems like a carpenter owned it

Looking for a bar tip, will the 12 tooth Oregon fit?

I recently took apart Both saws, and was puzzled when I saw the one crank had offset lobes and almost relived when I saw the other one was the same. Is this normal?

Still for sale?

On the box you can see they show a anti kickback chain

Looking for a ms200 service manual and husqvarna 372 service manual Mainly the ms200 I took it apart and now it’s been too long To remember the wiring routes

Looking for a piston for the round intake style

I have a Husqvarna 575 XP with a broken clutch .I tried to order a aftermarket 372 clutch to see if the clutch shoes would fit which I heard they would but it doesn’t fit I’m thinking if I got OEM Husqvarna shoes they would fit Also could I have a machinist make the 372 clutch the thread size...

I have the case altogether now one bearing was really hard to get in even with heat the other one just dropped in after heating and putting it in the freezer. should I be worried

I am worried about the bearing spinning as well Was thinking about using a retainer compound as insurance It’s on 07. I thought the issues were earlier

Hello, so I bought a 575 xp for 110 with a scored cylinder Not knowing how or why it burned up I tore it down The bearings in the lower end felt knotchy So I split the cases The bearings has what looked like carbon or maybe burned sawdust They cleaned up well in a ultrasonic cleaner Anyways I...