Search results

Cliff Thanks a big bunch for that write up...I will have to take my time on this. I guess my stihl 26 will take up the bulk of work next 2 weeks. You the man !! :yourock: Thanks Keith :cheers:

re Cracked hoses HI. This saw seems to have only one hose which sits in the back wall leading to the gas tank. You have to push the carb inlet onto it. Otherwise, no other hose to speak about. I do see the connect off the carb that prob would go to a impulse hose ( like my Stihl would) but no...

Hi All; The Story.....3 weeks ago this saw would idle but not run up, adjusters not helping due to platic stops. The plastic stops allowed carb adjustments of 1/2 turn only. After some work I have managed to remove plastic stops on the Walbero 739 carb that came with the echo saw from hd. I...

Heh Erick and fellow travellers Hi Guys Looks like Ericks idea should be put in the new section called,,Startup procedure for new or rebuilt carbs,... I did as Erick suggested and , usign a small syringe was able to squirt some gas into the carb....Wow,,,what a difference..it wanted to go...

Heh Erick I used a old type compression tester. It does have a moving needle so I though if the impulse can pull the needle we are on Anyways. no go on that...but I will use it tomorrow on the engine itself, CHeers Keith

Heh Guys I went back out and put a compression tester ( read cheap..lol) on the impulse line and got no response on the meter. I did not find the oil can as planned so I thought this would ba a good second. Because of the kickback this thing gives, I tried a few pulls then pulled the plug..same...

Tim 51, Walexa07 Thanks for the link...I think that is the same as Walexa07..they are a month backorder. Walexa07, The link i have is http://www.m-and-d.com/WL-WT-194.html I will report an update as soon as I'm back Thanks Keith

Walexa07 and Fish Well, I might if he shipped north...hmmmm Well Fish, Im out of luck on that on..lol thanks for looking Im going out to test the impulse line...will report back a bit later... Cheers Keith

Ebay guy does not ship north it seems HI; I had another look at his site and he states 2 different locations that he does not ship outside the US. too bad.. I did find 194 at online 41.00 ..that is the exact one at least.. Im going out shortly to test the impluse line...see what it...

Oppps got it I got that..I guess you were typing while I was... lol

Hi Erick Yes, when this all began a weeks ago I did just that. I put some fuel in, put the plug back in and it wanted to fire right away. That is what gave me hope that I was close to fixing it. You said in an earlier write that you have used the 494 in place of the 194. What did you do...

HI Walexa07, Fish. Erick I had a look at this 426A carb web link and I dont see the impulse line coming off the top otherwise it appears to be exact replacement carburetor for mine. Adjust screws are in the right place.. I see the ebay guy already has one listed... I wonder if that option is...

HI Erick Yes, The holes where the 2 adjust screws came out were real clean, much the same as the rest of it. Ill get back out the to shed as soon as I can and see if the impulse line does anything at all with oil... Thanks Keith

HI Erick Yup did all that,,please see my first post on this. I found a close Oregon replacement at http://www.baileysonline.com/itemdetail.asp?item=OEP+50609&catID=410 but mine does not look exactly like it so.... Thanks for your post Keith

HI guys Well. I have the carb in front of me and the needle port is clean. One less thing to look at , thanks Fish. Well Novaman, that hose is the Pita for sure lol. I will round a new one up and have a try at it. By the way, I still have a need to find out the cost of a new carb..wt...

Hey guys First, I set the L adn H one turn out , per the manual. Next, I did not check the impulse hose for leaks as it is easy to see but hard to get to. If I take the body apart I may be able to get to it. Is that the easy way to go? I will go back out after lunch and look a the impulse...

Hi Lakeside33 Well, had it apart, sprayed it well and then I let it soak for an hour. Just retrieved it from the fluid, dried it a bit and remounted it. Pulled with and without the plug in but still no go. No gas to the spark area at all. I called around for a carb and they want $135.00...

Thanks Lakeside33 Im on it... Thanks Lakeside33 Im on it...

Cleaning... HI Lakeside.. Thanks for the reply. Does that mean I take the L and H srews out and spray or do I try from inside? Im sure you mean outside the carb but Im a bit new to it and want to be sure Im getting it right. Thanks Keith

Hey Guys; I have this 026 which I picked up last year. My brother inlaw says it ran maybe 2-3 years ago. I cleaned up the mag generator and reset it. It sparks quite well. After reaching sore arm status several times I pulled the plug to verify no gas is getting to the spark plug. I reopened...