Search results

Thanks much appriciated your thoughts,very helpful

Hi guys, I bought Sachs dolmar 122 super chainsaw yesterday from ebay for £55. Looks like it is in good condition but i have not received the saw yet. I beleive i will get it in next 3 to 4 days. I beleive it is 70cc saw which looks quite powerful. My question is Is it good saw? Or have I...

do i just need a clutch or do i need sprocket/drum as well? can sprocket/drum can be wear out? the reason i am asking that these parts are quite expensive so i can use the existing sprocket/drum then it will save me some money, also any idea about too much oiling? is there any screw that needs...

hello guys thanks for everybodies help so far, i managed to start and run the saw yesterday evening, sorry it took me bit of time to adjust the carb but the saw has good compression and power. it is very heavy and powerful machine. one thing i did notice that the chain is keep running even on...

hi guys, i have cleaned the cylinder, used 400 grid paper then used red Scotch-Brite all the marks are not fully sorted but it smooth other than one mark which i thought i need to leave, i spent 10 - 15 minutes in the cylinder and cleaned it with hand. now i have put everything together so only...

much appreciated guys, very helpful. seems like i have some work to do over the weekend, will come back to you if have any further updates or questions but very helpful thanks

thanks guys much appreciated very useful information. one question though when i am cleaning the jug with grit/sand paper do i need to do in circle or up and down, i just read it somewhere that you should not move up and down rather move your hand in circles, is that right? also where i can buy...

Hi Guys, i am trying to save a cylinder for my Stihl 056 AV Super chainsaw, it was running badly before i taken this into parts and seen cylinder was badly scored. unfortunately piston was shot so i bought new piston and rings cost me £30. but then i am trying to save the cylinder and so far i...

Hi guys thanks for everybody help i beleive i have found the issue. There are two issues at the moment one is air filter back cover is missing. I have compare the filter with the original one at online and it is missing back flip cover. Which means the saw never triggers the choke. It is not...

Also what black wire does and if that wire does not work then what issues should i face? Thanks zolo

So i tried running the saw again took me bit of time to set the carb but it fired and was running ok. But still the kill switch does not stop the chainsaw and on the full choke chainsaw was not running at high speed i was unable to see any difference on the full choke or or normal start...

Thanks guys i will take a picture tomorrow morning. Thanks for your help and much appriciated. People on this forum are very helpful. I am loving it. Thanks zolo

Thanks LoveStihlQuality, much appreciated...... i believe you are right, I might not pulled the choke all the way down, I don't remember now but will check it tomorrow, also i will try to kill the wire off. I have run the stihl saw previously but i have little knowledge about chainsaws

thanks for your great information and help, how can i check the leaks without running the saw, is there any easy way to do it. I am kind of DIY person.

thanks for your reply, i believe throttle control would be fine as soon as i stopped the choke, it was running fine again. so my question is why it was not shutting down when i was opening the choke while chainsaw was running. It should stop am i right? also i will take some pictures tonight as...

Hi Guys, sorry about the long story, i bought Stihl 028 AV Super last week from an old man. he was not sure about the history of the chainsaw but he said it was running few years ago. it was a very cheap deal. as far as i heard Stihl 028 AV Super is very reliable saw. so i cleaned the saw and...

Thanks Guys, really appreciated your response, I am going to buy this one and let 's us hope i can fix it, if i have any more questions I will come back to you. This website is really good, lots of help.

Thanks for your response, is this means that I need 5mm Hex Key to remove cylinder screws? I found the below link on Amazon would it do the job? https://www.amazon.co.uk/d/Hex-Keys/Silverline-323710-Handle-Set-10-Pieces/B000LFRWQE

Thanks for your advice, I do not use chainsaw on regular basis and I am not professional as well so spending $50 plus international shipment (I am in UK) is going to be expensive.

Hi guys, I am trying to open/remove the cylinder for my Stihl 041 AV and I am unable to find the right tool for it, as far as I believe it has 4 trox T25 screws on the cylinder but I am not sure which tool I need to use to remove those screws as screwdriver has to be more than 4 inch long, I...