Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bang

    Walbro carb search

    A friend gave me a 1990's Era Craftsman saw to get running for him. It's pristine so worth working with. It has a Walbro wb310 and I've kitted and ultrasonic cleaned it a long time. I cant find a 310 or the prior/replacements 247 or 310-1. Can anyone help with a possible replacement .
  2. bang

    Want to Sell 026 Pro shelf queen

    delete
  3. bang

    Idle adjustment Stihl 180

    I bought an am carb for it after a kit and ultrasonic clean didn't fix the original. The carbs have only an idle adjustment. The saw runs great but idles too high and the chain spins a little regardless of where set. Is the screw for an idle circuit and is there anything that can be done to idle...
  4. bang

    Sold Homelite 190

    No time for this project and I need room in the shop. It's been sitting several years and feels like it has good compression. Look at the pictures and you will see at least 1 screw missing from the carb. There is no stone on the sharpener and iirc this isn't the type of chain that is used with...
  5. bang

    RedMax G500 parts

    Bad oil pump and hose and I'm unable to locate the parts. Can anyone send me in the right direction? It's not mine and I'm just helping a friend but it's a very nice looking saw that he says is strong so I hate to not see it being used.
  6. bang

    Different models is ms250?

    I rehabbed a 250 and it is missing the brake handle. I ordered one from Huztl and it was the wrong one and I assumed they sent the wrong one so I ordered another aftermarket handle and it was the same as the Huztl. My question is are there different models of the 250 and if so how do I know...
  7. bang

    Chance to pick up a 362 project

    Supposed to be a runner with parts missing (donor saw) but not sure what, maybe carb and flywheel. I looked on ebay but didn’t see much afa used parts. Are used or aftermarket parts rare for the 362?
  8. bang

    Limiters removable on ms 311/391

    I messed around trying to remove the hs limiter and wallered it out and so far it's not out. Looking in the hole I don't see a slot in the screw, is there a normal adjusting screw behind the limiter?
  9. bang

    Forester chain

    I got a Forester b c combo the bar having the pro tip with full chisel chain to put on a saw that I'm selling. I found some oder threads that were mostly negative re the chain and fairly positive re the bar. Being that the threads were mostly a year ago I'm wondering if they have improved as one...
  10. bang

    Stihl ignition module

    I'm having a problem finding a spark on a ms311. I have a 391 also and I swapped modules and it didn't help. I'm thinking maybe the kill switch wires but haven't tried it yet . The question is, in reviewing the service manual it shows a sleeve on the plug wire and location and direction of gap...
  11. bang

    missed out on 2 saws

    I have a buddy that goes to auctions and flea markets almost every day and he watches for saws for me. He called from a sale this morning and said there was an 020 and an 032. I told him to pass on the 020 and go $100 on the 32 that was in good condition and a runner. The 20 went for $20 and the...
  12. bang

    big bore 311

    I'm going to replace the engine in a 311 can I go bigger and use the parts from the311? if so what is the largest I can replace it with?
  13. bang

    Huztl review, the good, bad and the ugly

    I received my Huztl order early this month and finally got around to going through it and install the parts last night. I ordered a complete engine, a carb and a brake handle for a ms250 and some misc stuff. The good: the engine looked very nice and runs well although seems low on power as of...
  14. bang

    026pro value

    I have been looking for an 026 or a 260 and I've located a 026 pro but I'm unable to get absolutely any description, just pics. Looks good but it may be locked up or a runner. I don't need another saw but I have been watching for an 026/260 at a good price to add to my collection and to scratch...
  15. bang

    Huztl fast shipping

    I bought some parts and tools off their website late on 2/20 and they arrived today. This is my 1st order from them and the parts appear to be nice but I can't say that for sure yet.
  16. bang

    pin oak down!

  17. bang

    couldn't resist

    Found it on CL, guy wanted to meet at a public place and come to find out we live on the same road less than a mile apart. The saw is in pretty good shape, starts, runs and oils, oh and the price was right. I'll take it on a test drive next week after I sharpen the chain.
  18. bang

    028 shutoff

    New member here, I've been lurking for awhile and I enjoy the site and recently joined. A little background, I'm not new to wood cutting or wood stoves and I have years of experience blueprinting and rebuilding kart racing engines both 2 and 4 stroke. I'm getting more interested in chainsaw...
Back
Top