Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. John Lerum

    Jonsered Chainsaws

    I may have some parts going up for sale if you need anything. Probably going to look at a different avenue as far as work saws and I'd hate to see these get broken anymore than they have plus it takes way too long to get parts not to mention price. These still rip for the class and oil like mad...
  2. John Lerum

    Jonsered Chainsaws

    Those are polished nicely
  3. John Lerum

    Jonsered Chainsaws

    I've seen a few cylinders from both as well as the early 94 cylinder which is supposed to be different and it seems like the intake is ported a bit different and the exhaust is shaped differently as well. I have a couple 2094's and a 2095 and the 95 is a screamer but it's hard to say unless...
  4. John Lerum

    Jonsered Chainsaws

    The only difference in carbs may be that one is cable operated and the other is linkage. Pretty sure they're front and rear handle specific as far as the carb choice goes. So if you want to put a 94 carb on a 95 saw you need the front and rear handle to match the carb but I could be wrong
  5. John Lerum

    Johnsreds 2094

    Definitely the better deal as far as parts availability. You would have loved the Jred till you had to find a part for it
  6. John Lerum

    Johnsreds 2094

    Did you end up getting the beast?
  7. John Lerum

    Went golfing with the 2095 today...shot +5

    sharpening after hitting the nails
  8. John Lerum

    Went golfing with the 2095 today...shot +5

    Hit the nails, stopped on that cut and made another cut across the bottom. Then we rolled it over and cut off two more and came through the back side of the slab with the nails to finish
  9. John Lerum

    Went golfing with the 2095 today...shot +5

    There were a few nails...one ripped off two teeth but didn't really hurt the rest. Fun sharpening that thing...made a nice Saturday out of it. Had a couple rot holes in the base but otherwise it was solid. Sat right next to a putting green at a golf course
  10. John Lerum

    Went golfing with the 2095 today...shot +5

    I wish it were mine but I only got to help cut it
  11. John Lerum

    Craigslist 3120 $850

    Oops sorry about that
  12. John Lerum

    eBay Jonsered 2094

    Ah yes, makes sense now I've used a couple 2166's at workwork briefly had a 2186wh that was light and comfortable for a bigger cc saw
  13. John Lerum

    Craigslist 3120 $850

    https://eauclaire.craigslist.org/grd/d/arcadia-husqvarna-3120xp-chainsaw-24/6806653714.html Seems reasonable...
  14. John Lerum

    eBay Jonsered 2094

    There's a 2100 locally on Craigslist that looks good but they want some coin for it https://minneapolis.craigslist.org/dak/grd/d/lakeville-husqvarna-2101xp-pro-chainsaw/6824180355.html https://eauclaire.craigslist.org/grd/d/arcadia-husqvarna-3120xp-chainsaw-24/6806653714.html Also this 3120...
  15. John Lerum

    eBay Jonsered 2094

  16. John Lerum

    eBay Jonsered 2094

    Did anyone see that recent 2094 that was listed? Had a welded handle and issues pulling it over. I got that saw, popped the muffler and the piston looked good. Pulls over no problem without the plug but it seems to have a huge amount of compression with it in. There's no drop starting it and I...
  17. John Lerum

    questions about you?

    15 years working for the tree service plus I get to mill on the side Almost four jonsered 2094/95 20" 32" 36" 42"
  18. John Lerum

    Jonsered 2095 project

    I used a kill switch from a 2054. Just enough wire and the switch is the same so no fitment issues
  19. John Lerum

    Want to Sell Jonsered 2094/2095 air filter and cover

    Looking for a 2094/95 air filter and cover. PayPal ready Thanks
Back
Top