Search results

I use motor oil and atf dextron mixed at 40:1 plus a dash of oregano cuz I like the smell.

Does anyone know the shindaiwa chainsaw models that share the same coil system as the echo 440 evl

Sure did….

Well not my echo, trying fix my 84 year old fathers 440evl. The coil has failed and I haven’t read a past post on option. Anyone have suggestions, original and after market appear Nonexisten.

hi guys replacing my ms 360 pro setup with a 20" bar. Love the stihl accept the fuel and oil caps and its getting tired. Looking at the dolmar 6400 and the jonsered 2166. Mostly because I have a close dealer for both. The jonsered dealer said the 2166 was the best jonsered match for the dolmar...

Oldman sawing! Thanks everyone who responded, I'm still gonna tune his saws and provide him with sharp chain until he decides he's done. His kids may ##### and mown alittle but thats how it'll be. Nice to see that most of us agree if ya stop moving your dead. Speaking of that I gotta get off...

Just had tell ya about trying to help my neibor with his saw chain. Went over to see what he needed for new saw chain and maintence as I do every year or so. He's an 80 year old ex-farmer that still goes to the woods and cutts his own wood. After and hour of looking everywhere for his 3...

Ok seems crazy to me that I cannot look up or find a set of dawgs for my ms360. I want a middle of the road set not the stock small ones and not the big honkin ones. I have a single off of what I think is a 066 but it fits my inner on the ms360 it has a part number of 1122 664 0508 why can I not...

dogs thanks guys, The stihl kit with the roller is really what I want. Do you have any part numbers for those larger dogs. thanks for the suggestions!! the Hoosier

Hi guys; I wanna replace the single inner dog on my ms 360 pro with a larger set inner and outer. What are some options that would fit the pro. I've been searching and havn't come up with any options yet. Thanks the Hoosier!!

Remember about 1 horse power per cutter in the cut. I was always told is the basic rule. You do get a more jagged looking surface with skip chain but it shouldn't be splintery to the touch. If it is change your degree angle. Happy milling the Hoosier

15 degree and 25 degree a dime on the rakers. I perfer the skip tooth format not full comp or the ripping chain. Buy new chain file it to the above spec and you will be pleased. happy milling the Hoosier!

Bar choice My bar choices are based on the replacement tip. I have a woodbug mill so having the tip modified to run in a track, occasionaly requires it to be changed. Ease of replacing the tips is my deciding factor. I use the Oregon power match because of the one tip connection point. I have...

Skip tooth format 15degree and 25 degree with a dime thickness drop for the raker. I bought ripping chain this time and way disappointed, I will go back to standard skip tooth and file it to the above spec. The half cutter design on the ripping chain doesn't cutt with the same velocity (in my...

The first couple passes were hard but after getting the rakers tuned back to the woodbug spec it pulled the saw out of my hand. It felt good to know I can sharpen the chain by hand again to make it cutt as it should! I'm not sure about being black locust (no dark core) but it is some kind of locust.

Yes it's been about two years since I have sawed any lumber. I finally got the woodbug dug out, husky sharpened up and squared up some locust. My project was to find some straight timber for some 5x6 15 foot rafters. My straight locust trees were mostly big enough. I left a litttle bark on a...

scared? Ok ya guys are now scaring me with the sycamore comments. I scored a huge piece of wood last fall and need three beams out of it. they were to be ruffly 5 1/2 wide and 10 inches tall by 18 foot. with one being a center cut and the others from the sides. They will be under a mild load...

cs4400 Got a cs4400 love it. I would like to buy a new cs-450/ 450p? Not sure about the differences in the new saws. I would like to hear from someone who knows the new saws. The Hoosier

Potash Its great Potash, spread it on your garden or fields. I throw a couple shovels on each load of leaves of manure I spread. the Hoosier

cooool Yep love the cool. 60 degrees is my temp but still want that cheap hot water!! The ordinance allows OWB to function from September 15th till May 15th then shut them down or pay $100.00/day fine. So far I have heard that they have enforced that part. Further burn what your factory...