Search results

I need a sprocket cover for my 019T, #1132-640-1706. Does anybody have one for cash/ trade?

Just as a side note, Sandefjord is one of the most beautiful places in Europe. Back in 1969, I was in an Airborne brigade with the US army stationed in Mainz, W. Germany. We parachuted into Sandefjord onto Torp airfield which at the time was just a single runway and a taxiway along side. Now...

Which carb are you using? Can you take a couple more photos of your set-up and the details.

I have been a trail overseer since 2003, I have a MS150t but use a MS200 rear handle in non-wilderness areas along with Silky Sugoi, or folding Gomboy and use a folding Katanaboy in wilderness areas which weighs under 3 lbs. and will quickly cut most blowdowns you will encounter. No chainsaw...

I just went through a 55, it needed a piston and cylinder, went through the carb, reused the gaskets, it did need a new impulse line ($3+), located at the bottom of the cylinder beneath the carb intake boot. Make sure you have a good spark. You can buy a spark tester for a couple dollars at...

I may have a couple for sale in nice shape. I live down in Va. Beach and have a friend up your way that I can get it to. The price would be around $200. PM me if you want photos.

I'm still maintaining RipRap, 14 years now. I have several friends out that way on the horse farms.

Look at part #20, mine only had 1 in place, should of been 3. The only thing that I found of the missing 2 was a flat sort of "square" side piece of #20 jammed between the drum and casing.

I just went through the same thing with an 039. Make sure the chain brake is off, and use them vise grips. Mine had part of a clutch retainer (1127-162-3000) jammed between the sprocket drum and the housing which was the problem. Make sure to inspect the clutch, the bearing, oil pump and oil...

Hey Guido, Satterwhite's!!!!!! I haven't been there in a real long time! I use to stop in there often back in the 70's, 80's. Good food and country music. I have friends in Manakin, Oilville, Columbia and Gold Hill.

The part number is 1125-647-2002. Anybody have one?

Where are you in Virginia?

If you're looking to swap for a MS241c, I may be interested. I already have a 084 with a 3/8 set-up so what else do you have to trade?

They also have a new MS 193T.

They have both the MS 201 CM and MS 201 TC-M. There is a sales video on you-tube that is in Italian.

Just read that Stihl has the new MS201cm available in Germany. You can google it up and translate the info into English, etc.

I recently acquired a McCulloch G70 and am in need of an ipl. Can someone help me out? Also according to Mike Acres the fuel mix ratio should be 20:1??? What should the compression be? It has plenty of spark. I removed the spark plug and put mix in the cylinder but it doesn't fire. Possibly...

Where are you located in Southside US, Virginia?

I'm struggling with replacing the oil hose on my 084. The dealer said that it needs to go up through the bottom, then it needs to bend and protrude from the opening just a little bit, where you then push the brass cone into the hose. Would it be easier to start at the top opening, get the hose...