Search results

The 010 is 37cc's. Never had one, but I have an 011 and its been nothing but good to me. Should be great for a little limbing saw. As for what its worth, probably not a whole lot.

Finally got around to checking compression and only hit 100 psi, looks like time for a rebuild. Figure i might as well clean up the intake and exhaust a little while i got her torn down.

Took off muffler and looked at cylinder and piston this morning, and they look factory perfect. Looked at impulse and fuel lines and they seem a bit spongy, so I'm gonna go ahead and replace them and fuel filter as well.

plug is tan, doesn't really smoke, and 50:1 mix with stihl oil

i'll check that first thing in the morning, what are you thinking low compression or something

My 039 starts and runs perfect, but only when it wants to. I thought coil because when it does run, it will just die suddenly after running a while. Then i checked and it still has spark even though it won't start again. I wouldn't think its a fuel problem because it runs perfect when it...

Anyone know what size the bearings are in the starter assembly of a homelite 4-20? thanks

What is the longest bar I can run on a Mcculloch Pro Mac 610? I cut mainly hedge trees. Thanks

oops wrong size rope, and generic:(

I have a 10 year old stihl 025, and the rope just suddenly started breaking on every 10 to 20 pulls. The rope is new and plenty strong, so i just want to know if there could be something wrong with the recoil itself? Thanks

Thanks Gents!

Anyone have or know where to find a diagram of how a homelite c-9 starter goes together? thanks

Any homelite guys out there there. I need to know if i can put a c-9 .404sprocket on a super xl automatic. I have a bunch of .404 chains that fit the xl, but the xl sprocket is for .375. Thanks

I have a good carb from a c51, it's a Tillotson hl-141b. Can I run this on a c9 which had a tillotson hl-141a carb? I figure it will work but wasn't sure if there was a huge difference from the a, and b models of these carburetors. Thanks

Just picked up a nice homelite C9 for $20. I was wondering if anyone knows how many h.p. this saw is. I found out everything else about the saw, but couldn't find a h.p. rating. Also what is your guys experiences with these saws, good or bad Thanks

thanks guys

anyone have or know where to find an oil pump for a mccullough pm 610

if I mod the muffler on my husqvarna 340, will i have to remove the limiter cap on the high jet, or will it richen up enough without removing the cap? Sorry if this has been asked a lot before, but i couldn't find this doing a search.

I want to mod the muffler on the husqvarna 340e I just picked up. Curious if any of you guys have done this already, and if you have are there any pics? Onr more thing what does the e stand for in the model#?

Goin to pick up a new husqvarna 350 tomorrow. I want to get a spare chain also. my question is which is better, the husqvarna or oregon chain? Also what size file for .325 chain?