Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Wirenut2266

    Cold bar oil.

    Nice Idea Brother. I purchased that stuff Menards sells, I believe it was FVP, dear god it sucked. It was maybe 25deg, horrible. I will buy a better brand next time, for now, leave in truck while out in woods!
  2. Wirenut2266

    The Beg for Manuals Thread

    Looking for IPl & Service Manual for a Stihl 192tc please. Thanks, Bruce
  3. Wirenut2266

    Why did my splitter puke oil??????

    Now that I think about it, he did tow it about 15 miles on gravel roads, and is splitting in woods, so he may have pulled the sucking hose loose as well an well as agitate the oil......I will ask him now how it is doing? thanks for responses!!! Bruce
  4. Wirenut2266

    Why did my splitter puke oil??????

    I am confused.....I have a homemade splitter with 8hp engine, 16gpm pump, 5 gallon reservoir. My buddy wants to borrow it, I say no problem. I start it in my garage, runs good, show him operation and off he goes. Following morning, he states he starts it up, first thing it does without touching...
  5. Wirenut2266

    The Beg for Manuals Thread

    Thanks a bunch!!!!
  6. Wirenut2266

    The Beg for Manuals Thread

    Looking for a Stihl 441 Magnum IPL and Service Manual please.........
  7. Wirenut2266

    Stihl 044 IPL & Shop manual please....

    Well my old computer finally died.....Lost quite a few documents. Could someone please shoot me a stihl 441 Magnum ipl and service manual? Or a least an active thread for "beg for manuals"? Thanks, Bruce
  8. Wirenut2266

    MS441 Fuel/oil flip style caps question???

    Was wondering if in fact the oil/fuel flip style caps are the same or different? My IPL looks like they are the same part #, but looking at a couple different web sites states they are different. So now I am confused. On Fleabay, you can get a pair for $10-$15 but question quality/compatibility...
  9. Wirenut2266

    I know now why I made my dad so mad

    See now a thread makes you think of good times with your dad, mine is gone, but still puts a smile on my face! Just keep passin down those genes to your kids and all will be ok!
  10. Wirenut2266

    Splitter acting/working weak?

    Never thought of that......If engine bogs, that means prolly pump has enough output psi. But if broken/stuck spring in relief portion of control valve body is bad, yes it will fight itself! :)
  11. Wirenut2266

    The Beg for Manuals Thread

    Looking for shop manual for MS441 if possible. I have IPL if someone needs a copy. Thanks, Bruce
  12. Wirenut2266

    Splitter acting/working weak?

    I doubt a filter issue, when they get plugged trust me you will know, it will blow out. But changing it not a bad idea..... 1. Keyway from pump to motor coupling would be first look at, under load it may start to slip if worn. 2. Can you install a psi gauge on output of pump and check psi...
  13. Wirenut2266

    MS441 Magnum manual needed......

    Hello fellas: Just wound up with another nice 441 the other day. Looking through my manuals I know I had one for an old 044, but of course can not find it. If someone has a .pdf shop manual for 441 magnum that would be swell! Thanks, Bruce
  14. Wirenut2266

    new thermostat ,,,no heat ??

    am am very familiar with your style of furnace. Trouble is, no real control board. Just wires hanging there, correct. You may be able to wire in a "fan control center". You get get them from Grainger, etc. I would run stand alone t-stat to (new) to fan control center. Then on fan center, when...
  15. Wirenut2266

    Thermostat needed for OWB

    yes you may install a 2-stat stat. The w1 one the stat would go to the fan relay on furnace, and the w2 on stat would go to heat relay on furnace....Good luck, should work just fine!
  16. Wirenut2266

    Don't buy this ( Tachometer )

    I've had $300-$500 Fluke meters crap out just sitting in office. Always the display. What I have learned is the dust gets in them and does something to the connection from board to the LCD itself. See if it is direct soldered or plug. If plug in style, pull apart, blow off, use alcohol and...
  17. Wirenut2266

    Dont let this happen to you!

    Hope all works out for ya. I just want to say thanks for the story. I wear eye/ear protection always. Never a hardhat.....Guess what, the one in my basement will now be dusted off and be part of my PPE it should have been all along! Thanks, and god bless with quick recovery! Bruce:deadhorse:
  18. Wirenut2266

    Creosote

    Logs recipe looks good too me. Hard to follow all the time though......We all get lazy!
  19. Wirenut2266

    No Heat For 13 Hours

    Here's a reality check fellas: I bet my 2500 watt generator would do all I need it to do. For $750 for a good one. Why would I care about ac, garage, whole house etc? Run the heat, frig, freezer, and living room for lights or TV, what else do you need? What about fuel consumption? A 8kw will...
Back
Top