Search results

I purchased this about 2 years ago and was supposedly buying a filter for a 550. Once I got it and found it didn't fit, it ended up in a box of parts until I recently found it. Too late to return it so I'm looking to get it to someone that can use it. I'd take $5.00 plus shipping. It should be...

2011 346 50cc with an orange clutch cover. This saw is in decent cosmetic shape but not a beauty queen. It has had the muffler modified, base gasket deleted and it runs very well. Compression is 160 at 3600 ft. The piston and cylinder look great. I've always run 40:1 fuel with Stihl Ultra in...

I have a Stihl 026 that I'm hoping someone would like to have as a project more than I would. Missing: 1 starter cover bolt that also attaches the chain brake Air filter Air filter cover Will need at a minimum: The above missing items Fuel line/filter Impulse line Piston and rings Clutch drum...

I have a Oregon 73 (LGX)?? Chain. Round ground chisel chain 105 DL. It's about half gone and I don't have a bar that it will fit. It ought to fit nicely in a 5 dollar USPS box. 5 bucks plus 5 bucks shipping. It needs to go to someone who will use it and I won't have to keep moving it...

Other than a little freehand playing around, I'm just getting started with milling. The saw I've dedicated to milling at this point is a Pioneer P61 that I've added a dual port muffler and a few other performance improvements to. I have an Alaskan 36" mill and just got some Granberg ripping...

Looking to purchase a 395 high top air filter cover in good used condition.

I'm assuming this is the oil tank vent on this Jred 625? It's directly above the oil tank cap and goes through to the inside of the tank. It appears to be made of a group of small copper looking wires. This saw is leaking bar oil like crazy. If my other repairs don't fix the problem, I'll...

Getting rid of some extra parts that I don't think I'll ever use. 385 mesh air filter and low top cover. Both were used for less than 1 tank of fuel. The top cover does have 1 little piece broken off (see pics) but is just cosmetic. $15.00 + shipping for the both Husky 346 silver colored...

I am looking for the rear port type muffler for one of the larger P series or Poulan Pro saws. It doesn't need to be new and shiny, just in decent shape and usable. Thanks

I'm wondering if anyone has seen this or knows what might have caused it. Was running the 346 when the chain began to slip. I thought maybe a clutch spring broke. Took it apart at home and noticed the rim sprocket wouldn't move on the shaft at all. I pulled the clutch / drum and found the...

Looking to buy a clean P41 cylinder. Only looking for nice used or NOS. Thanks

I have a brand new Husky branded bar and chain that came on a new 346 I bought and do not have a use for. Hasn't cut wood, brand new. Bar: 18" .325 .058 72 DL replaceable sprocket nose. Model # HT258-72 Chain: H21 072GX round chisel chain for the above bar. I also have a almost new mesh...

Hoping someone might know what the specs are on this bar. Oregon 208ATMD007 Helping a friend with his saw, Jonsered 625, and this bar is on it. I almost didn't get the chain off because there wasn't enough adjustment left to get much slack in the chain. It has a 50 gauge chain on it and was...

This is pretty wild. Couldn't post the YouTube video for some reason but here is the link. Looks like a couple of new Stihls bit the dust.

I found a brand new 2012 346 in a local shop a week ago and couldn't resist. I think I got a decent deal so I went for it. Now to get it ported!

I've got a friend that has a real nice 262 and he was aking me if I knew what the small compartment was on the rear handle/foot pad area of this saw. I didn't know and we couldn't figure it out. The compartment has a screw to keep it closed but doesn't look big enough to hold anything you might...

I'm looking for someone to check my methods and math before I proceed. Husky 357 with new aftermarket P & C. Dab of grease with .031 electrical solder at 12,3,6, and 9 on piston. New .020 base gasket. Installed cylinder with gasket and moved piston to top of cylinder. Removed cylinder and...

I've ordered a new intake boot and clamp for a 357 because the old one looked worn and cracked. I'm taking the old one off and can't seem to get the plastic piece off that holds the intake boot in place. the only think I can think of is I have to pull the cylinder to get this thing out.

Has anyone had any problems with the Woodland Pro narrow kerf bar fitting the saw properly? I recently bought a 346 from NMurph and the saw is awesome and I'm very happy with it. He was great to deal with too. I decided to try one of the Woodland Pro narrow kerf bar and chain combos from...

I have a husky 385 with a woods modification that is giving me problems. The saw runs great but when it was about 1 1/2 years old I noticed the top cover was sticking when I went to take it off. I noticed that the thin edge of the top cover appeared to have melted into the groove it rests in. It...