Search results

346 piped husky hello little leroi, you had better look that saw over carefully, when he ran it a oroville he came and asked me if a 346 barrel and a 026 stihl barrel would interchange. I told him of course they would. I think thats why he's had your saw so long. ken

346 husky One fast 346 hot saw

346 husky Here;s johnny with a sub 2 second cut in a 8 by 8

Finally finished up john's 346 husky. I don't know what all the fuss was about, It only took about nine months to finish. I was sitting here one afternoon last month and john shows up with 2 big, burly friends from toronto. Well, I worked well into the night finishing the 346 under threat of...

Piped 7900 Dolmar Hello Ben, Well it looks like you are getting ready for some heavy duty cutting with that dolmar. Now if you use some good synthetic 100% oil like maxima K-2 at 32-1 it should dominate the 5 cubic inch class. The saw looks nice ken

Stihl 066 vs 385 husky Hello Leroy, That 066kd looks good in the pictures but you should put the bar and chain on the 385kd and see which one is faster. my money would be on the stihl 066kd but they are going to be real close. ken

Hello Mike, Have all the porting and barrel work done on your echo 346 but am having problems with the reed valve assembly flowing enough air fuel mix. am going to try a different reed valve. will keep you posted ken

oly 999 heres a photo of the 999 before I sold it on ebay ken

999 oly hello cliff, How are you doing cliff. should be into your 371 by the first of next week. I had 2 of the 999 olympac's, really nice saws. the transfer's are already dropped out to the lower case and they come equipped with the ht-1 tillotson carb. it's a 6.1 cubic inch saw so...

husky 288 Hello jeff My local husky dealer has 2 288's in stock. give me a call or e- mail me if you cant find any closer. great saw, i've got a few loggers that think they are better than thier 385 husky' ken [email protected] 530-589-2744

stihl 084 Hello George, The original stock 084's just didnt run all that great stock. when we modified them they ran very well. they were designed 10-15 years before the 088's came out. Stihl realized that they could make power by changing some of thier port timing figures and some of the...

088 bar length hello ryan, up on the north coast in california in the redwoods they are currently using up to 8 ft bars with skip chain . lots of 4-5 foot bars used on that sized saws. we should check with uncle Art(Art Martin) , I think he used to use longer bars than that when he was...

stihl084/088 Hello George, The 088 and the 084 are the same sized motors but there are considerable differences inside. the 088 develops more power than the 084 does when they do stock. the factory changed a number of the things we were doing on our woods modifications, all for the...

overbore on 372 cylinder Hello wade, (crowe) Good to hear from you. How have you been? Yes I've done other sized barrels for these two fallers. tried to talk them out of it just on the cost basis but I must say after doing it that you get a big sense of accomplishment .Its like modifing...

husky 181 Hello cliff, I've done a lot of work on 181-281 huskys. They fit right at the top of the 5 cube class. excellent saw . The only problem we had with the 181 was if they were handled roughly by the fallers they would crack across the bar pad and leak badly. the early 181 had a...

eec saw event hi rob, Dennis and myself are both going to come out and try our 372's and see how we do. should make for some interesting racing. the battle of the engine modifiers ken

fast quite 394 Hi rob, that was several years ago. it is the saw in the photo.7-8 posts earlier but didn't have the pipe. when i blew it up it was a interesting event, one second I was turning 16,600 and 2 seconds later the saw was stopped cold. then there was complete utter...

saw durablity hi rob, a racing engine is always closer to the breaking point that a saw motor that is modified for the woods. When we port a saw engine we always spend time putting a radius on the port edges and put a slight edge on the rings. also put a 30 degree bevel on the bottom of...

treeclimber165 Hello brian If you get the filing right with round filing it cuts fast. as you can see in the oregon chain tests when round ground is done right the factory round grinding outcut thesquare ground carlton by almost 1.5 seconds. regrinding it on my round grinder cut off 1...

stock 394 husky hello jeff That is a fine running 394, We dont have a class for under 6 cubes with a pipe but a racing buddy, Jon Rupley(saw racr) called me last year and told me he had just bought a 2100 husky with a alcohol carb, removable cylinder head and a expansion chamber and he...