Search results

Looking for a IPL and shop manual for a Stihl HT73. Thanks in advance.

Very nice Mark!

Webb Farm Supply in Soquel, California ought up all the remaining parts inventory when Piqua Engineering went out of business. Lowell Webb owns the business. I have a EK308 that I acquired in 2002. Webb had the manuals and parts I needed to get my splitter going. This is Webb's contact info...

I rebuilt that carb including the plugs. I've replaced many and never had a problem. That saw was used and used hard for decades. I believe the throttle shaft hiles in the body were leaking excessively. I bought a new carburetor and the problem went away

I am looking for a IPL and Service Manual for a McCulloch Super 44. Any info is appreciated.

Yes, ring is present. I wound up replacing the carb with a brand new unit I bought from the dealer. The problem went away.

I look for the older Homelites and yours is in excellent shape for it's age. It's complete to the "ashtray" over the starter. It is a very nice saw. The Tillotson HL carburetor is very easy to rebuild and an excellent carburetor. Go through it and replace the fuel lines. I would do a...

I'm looking for a IPL and SM for a Stihl MS192TC. Thank you!

I went through the fuel hoses and they held vacuum. I did find a leak at the primer bulb base and replaced it. I thought I found the leak but I was wrong. Impulse for the fuel pump goes through the intake so no pulse hose. I didn't rebuild the carburetor. I posted on another site and got...

I have a Husqvarna that I got not running in pieces. The piston had light scoring but the cylinder was clean. I got no other information with this saw like how this happened, how it ran, any history of problems, etc. I put a Meteor piston and a Caber ring in it and started the saw to be sure...

I just did a vacuum test 9n a 562xp yesterday. I made a block off plate for the exhaust put of a peice of aluminum plate. I tapped a center hole 1/8 NPT for a hose garb. Ace Harware cells rubber tapered stoppers in the bulk bolt drawers that I used for the intake. I put a golf tee in the...

Mine has the chain. I'll measure it

I bekive my saw is 1980 and has the small caps

I'm looking forvan oil cap for a white top 61. Please PM me if you have one for sale

I rebuilt a Stihl 029 for a friend at work. He had me put a Meteor 039 P/C in it. I replaced the seals, impulse line and intake boot with OEM parts. The saw held vacuum and pressure with the muffler blocked off and a block off plate in place of the carburetor. Needle didn't move for an hour...

I have a T540 parts saw I got with a lot buy. I don't know anything about it other than what's in the pictures. piston isn't scored looking through the exhaust port. What you see is what you get. PM me a fair offer .

I am looking for a SM and a IPL for a Stihl 066. The saw was made in 1994 and has the short length block. Not sure if there's a different IPL for early saws

I was looking for a project, that's why I posted.