Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Kennygee

    Makita 510

    It was the first saw I bought a couple of years ago and still igets as much use as any of the other ones I have. I am running a 16" bar and Woodland pro chain and it has always been fine. I did Have to "fine tune" it some.:D
  2. Kennygee

    The Beg for Manuals Thread

    Homelite 410 I am looking for an owners and or service manual for a Homelite 410 I hope it is worth the trouble to try and fixi t------Again!
  3. Kennygee

    Husqvarna 266 will not start

    When You st it has "compression" was it tested witha Gauge? shpuld be atleast 110-120 Min. If the key-way on crankshaft has broken and timing is off it will not --timing is off Should have a nice blue spark. I don't belive the 268 had compression relief's ,but if it does have one it could be...
  4. Kennygee

    Husqvarna 2100 ..... Can A Chain Brake Be Added ?

    2100 chainbrake Ausneil1 it is a full side chaainbrake ,not just the handle added and modified. The swller name is "dwhusky and the "store" name is ARB Ireland. It lloks like maybr a factory modified brake off of a395/394 maybe?
  5. Kennygee

    The Beg for Manuals Thread

    Thanks!! Thanks Mastermind and Mheim for the very quick response !! You are a couple of reasons this is such a Great Site!!
  6. Kennygee

    The Beg for Manuals Thread

    024 AV owners/service manual Hello I am lookin for an owners or service manual for an 024 I just picked up. I have all kinds of Husky and Dolmar none for a Stihl Thanks Kenny
  7. Kennygee

    Husqvarna 2100 ..... Can A Chain Brake Be Added ?

    chain brake There is some one in U.K. selling a modified one that will work on a2100, but it looks like a rigged job to me. It is set up with a stop thru the handle ,and not on a full wrap at that, do a seach on the flea-bay. I think the price was around $80.00 U.S. plus shipping
  8. Kennygee

    Husqvarna 2100 ..... Can A Chain Brake Be Added ?

    2100 parts The most expensive part to replace and some times the hardest to find is the coil $140.00 new and $100-120.00 used. The piston's are availble after market. They are a real best of a saw, not something to take lightly. I have seen a couple of the chain brake covers on e-bay but they...
  9. Kennygee

    Stihl heads.....and I am one....

    Stihl Last!! When the sun came up this Moday and the damage from the tornado was evident I went and pulled my 266/272 ,and the Ech0 302S and the Olympic 935 off the shelf. The one Stihl I do own is 150mi. away and I NEVER miss it, as it is still in the closet! I ran three gallons of mix...
  10. Kennygee

    What Husky saw is that?

    2-piece ignition It does appear to have the 2-piecc ignition set up. This leads me to believe it is 162/61/ or 266/8 . The best way to determine other is to pull muffler and check bore dia.
  11. Kennygee

    20th Saw ?

    More Foreign Flair? Well how about something with some Italian Flair like an Olympyk? Or maybe some Oriental influence with more size than a 302 and spelled funny like a Shindaiwa, Makes You maybe want to take it fishing with You!:hmm3grin2orange: Or something in ALL Orange like a 272 or...
  12. Kennygee

    Help me ID this Husqvarna fellas

    Not Sure But? One way to tell is to pull muffler andtakt a piece of very thin wire or solder and measure bore size, easier to do with plug out also. A 56mm would be an 1100 which top cover and muffler seem to indicate. I have never seen one with the decomp valve though? It may also be...
  13. Kennygee

    Bringing up North East Texas GTG

    North Texas GTG Cliff, You should be able to count me in. We go to Kelly Creek quite often . It is in Maud if You weren't sure where it was at. When I use to ride a bike a lot. yea the funny looking pants and all we use to do the "Tour DeParis" and sometimes the M.S. 150 would go...
  14. Kennygee

    My new best saw under 100 bucks entry

    510 in Blue Is this the saw that was on Cl in Canton? I almost called about ,but since I have its BLUE brother I passed on it. It was the first saw I bought and You can see where it led to!! It is a nice little saw and I have had no real issues with it at all. Glad it found a good home...
  15. Kennygee

    Help with building a 2100cd race saw.

    thin rings Am I correct in the thinking that the thin ring pistons are designed for faster revs , but the standard rings had better sealing/compression?
  16. Kennygee

    Help with building a 2100cd race saw.

    Best piston? Which would be be the better piston to use on one of these ? The standard piston or the thin ring version? Just asking in case I ever decide to do the same as I still have an extra thin ring that I think is in very useable condition .
  17. Kennygee

    Why can't Remington get any respect??

    Remington Saws Here is a Remington In "Deere " Green and Yellow. Yes they are slow and loud, but when You get a certain age I think You have right to do so :msp_flapper:
  18. Kennygee

    Husky Parts Question?

    Will the flywheel and related coil and electronic module from a 162 or 262 work on a 266 SE that is set up for the 2-Piece system? Looking at various IPL's some have AM-2 and AM-4 with different #'s ? Not sure what the differences's are any help apprecited.:confused:
  19. Kennygee

    husqvarna 181

    Test As far as I know a 288 as well as 281 top end will work. As to quality an OEM would be the best and the most $$. You might want to try "Chainswr.com a site sponsor for good used items or the evil bay. One other thing that I would consider a "must do" before investing money is a...
  20. Kennygee

    CAD--Montgomery Ward & Wright chainsaws.

    Remington Paint Chris I have acouple of John Deere/ Remington saws. One is complete and runs quite well. The other needs a piston, and or rings, As far as the paint or lack of it, it looks like they painted it with sometning over cylinder, because evertything beyond what You can see easily...
Back
Top