Search results

Haven't converted to OWB but the principal will be the same for commercial or residential. Do you have baseboard, radiators or steam coil in ahu unit with duct work?

I have a 37 ton NT splitter also. Have had same problems seems as others. Replaced control valve twice, they sent new one both times no charge and paid return shipping no charge. Did replace hindge for raising to vertical the orignal one was not made heavy enough. Had to remove filter , kept...

I would use a tempering valve especially if you have small children. 135-140 water can cause severe burns in seconds.

I burn 90% red and white oak.Really don't bother to mix anything else in with it. Free wood is nice no matter what kind!!

Haven't changed to synthetic oil yet but considering it for wood splitter, and generator. I have heard once you change to synthetic you should never change back to regular oil. Don't know if that is true. Next time I change fluid in wood splitter will use Dextron III.

Neat set up. I use generac propane generator. I think it is 18KW. Have OWB and Ahu Fan wired to one circuit.

Thanks: Still need to do a little work, but like having dry wood.

Built wood shed this summer. Glad I did makes it nice having dry wood and not fighting with tarps to keep wood covered. Made it 12x30 so I could get my wood boiler under it to. You will definitely enjoy the wood shed. Will try to post some pics later. Not sure how to get pics onto web sight...

Red Oak & White Oak here

Fire box is not very thick. 9 gauge is less than 3/16 I think. Most wood boilers I have seen have 1/4 in. or thicker fire box. Just my opinion and everyone has one

I have a 511ax works great. Had a few problems at first with mine. When set at 0 vise was not square. Called oregon and they sent me a new vise. I must say they stand behind their products.

A friend of mine brought me a 26RMC374 chain off of a stihl farm boss.Can anyone give me some info on sharpening this with a oregon 511ax. Which grinding wheel do you use, and what angles do you use? Thanks:

call oregon and they will replace them if you havent already called. They are super nice in resolving any problems ou might have.

I am heating 3600 sq ft when I heat my basement. Only heat basement to 65-70. I insulated bottom of my stove with 2" rigid foam insulation and closed in with metal siding. Also like fishhead I raised my owb on concrete pad. I used 4" cap blocks. Makes it easier to load (personal opinion)Like...

I have had a NCB-175 for a year. Works fine for me. I went with it instead of CB because of price difference. I personally think CB's are the Cadillac of OWB. Friend of mine has CB, really likes it. I have burned approx 6 cord 4x4x8 so far this year. Every which one you choose be sure it is...

Kingsley i could not get pics sent other way thought i would try this. Hope it works this way. Sorry to be so much trouble. Thanks: Mike

Some one had mentioned there may be a set screw to loosen and make adjustment , my grinder does not have one.

Thanks for the idea of checking with new chain. Checked last night and marked on base, will try using those set points on a few chains see if angle stays same. Checked to see for adjustment to recalibrate angle set screw didn't see one. From post I assume the 10deg.down angle setting does not...

Recently purchased 511ax. Having trouble getting cutters sharpened on same angle. When set at zero angle vise is crooked. Not square with frame. Came that way from factory. Don't have one to compare mine to. No store sells them locally. If you set vise on 0 angle, right side is closer to frame...

Just ran across your tread. I have had a 511AX for a few months. Not used it to much but have found out if you are not careful on set up you will cut one side shorter than the other. When switching from side to side if you don't make sure you lock chain with same pressure against stop you...