Search results

How do you get to the top AV mount? Can't quite figure it out.

Found this video on the camera and thought I'd try to post it. this was last fall

Anyone happen to know the thread size for Husky top cover screws (272xp)? Mine are stripped and I need to helicoil them.

Here's a ride on the truck road to the landing. 6/10'ths from the road to landing. Here last weekend's work, about 10 hours, 9000bf pine logs and 8 cords of pulp plus a few aspen and some firewood Would have been more but it took awhile to get the loader going.

Finally got some wood hauled today, both truckers have been having problems. The wood was backing up on the landing we were using so we moved up the hill to the next one. Here's the first load of logs from the new header. The Grandson cut this load in 2 1/2 hours. 4000bf or a little...

My 6'6" grandson by the growing pulp pile - he cut everything today Water over the road Cut for about 6 hours today and got abot 1500bf of logs and 8 cords of pulp, not too profitable

Here's some otters in the kettle pond take by the landowner this fall.

Foggy rainy and damp, must be what you PNW guys are used to, 3/4 of the way out with the first hitch the skidder started acting up, like water in the fuel. Filter off, dry things out, back on, prime and starts right up, spits and sputters but makes it to the landing. What's up, idles for a...

Here are some photos from my seat in the loader. Maybe a video?

The header is now FULL - waiting to get the pulp hauled. Aspen (popple) and pine. The white wood is aspen from this weekend and the pine is from 3 weeks of cutting logs.

I have an older 670 with two piece coil and I need to rebuild the carb. Does anyone know what carb is on it and is there anything I can substitute - like a 272xp carb? Thanks

My grandson on the 385 working on a nice pine last spring, a 1500bf butt log and a nice load of pine.

Moved to the next section on the big lot - fixed up an old town road to get in. Put the landing in today. Still figuring out the best layout. Here's some pictures. Sent a load to the mill last week that I scaled at 7400bf, 43 logs on the truck, picked up the check and scale slip on...

Attach=config]309336[/attach]

A couple of recent photos Sunday's work 7400bf My neighbor's homemade skidder These pine add up quick The "Rockwieller"

I was just given a 30" Windsor bar with the following numbers on it JX08 30 40 50 SN with an SRA-222-A11 tip. It looks to be in pretty good shape but I have no idea what it fits. Does anyone have any ideas? Thanks --- John

My 1995 272xp has lost spark. Checked wire from stop switch, plug wire has been reseated in coil and everything has been cleaned. Is there an easy way to check the coil or should I just replace it? Thanks

Hi Everyone, My old Barko 160a (1973) is in need of a swing motor, working or rebuildable. Any help would be appreciated.