Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Reading piston wear/scoring help

    looks beautiful to me, don't see a problem, some of my best running saws look way worse than that
  2. M

    wanted ms192 cylinder

    needing an ms192tc cylinder
  3. M

    New to pro (stihl) saws NOT A GOOD START!

    had same problem lately not with 025 but anyway pull bar off and sight down it, top and bottom, small crook or bend will do exactly what your describing
  4. M

    Squish is still .052 with no gasket, now what?

    my 066 mag had no base gasket and run about 180 with baileys bb kit, only saw i have came across that wouldnt work without a gasket was an 028 woodboss, i run all mine that i have worked on without a gasket
  5. M

    The last of my saws are gone and I wanted to shed a tear

    what ??? no trees in Fargo ???? :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:, good luck
  6. M

    New MS880 looks like bad news for modder's

    that muffler actually looks very easy to mod. alot easier than alot of them , when your cutting u shouldnt get anywhere close to your max rpm's so if it were me I would mod the crap out of it:laugh: and not worry about the coil , just my .02
  7. M

    Stihl ms461 & ms661?

    what could you do to the 660 ? perty darn good the way it is , don't fix it if it ain't broke !!:hmm3grin2orange::hmm3grin2orange:
  8. M

    372 vs 2171 differences?

    wouldn't trade my 2171 for nothin ! IN MY OPINION best saw ever made !!!!:clap::rock::rock:
  9. M

    ? for Jred dealers

    my jonsered dealer is also a husky dealer and the jonsereds are the only shelves that are frequently empty, he said it wasn't getting the saws it is trying to keep them is the problem !!!
  10. M

    Saw For Lefties

    seems like no matter how I hold the saw i am still in line with the bar , I cut left handed, if i hold the saw right handed feels like my arms are crossed and seems more dangerous trying to cut a way you are not comfortable with
  11. M

    372 with 8 pin clutch

    on my 2171 i run a 24 inch bar, have both 7 and 8 pin, muffler modded and bb kit and you can really tell the difference with an 8 pin, no where near the torque , I don't even try to run the 8 but a 20 inch bar may work good with an 8 pin
  12. M

    olympic orange ????

    anybody found a good match for the olympic orange ?
  13. M

    MS 180 c

    What is your compression ? i just rebuilt 1, acted alot like yours , only had about 90lbs.
  14. M

    anyone buy used broken saws to fix them and then sell agin ??

    I got a shop I buy from all saws $25 a piece no matter what it is just bought a ms180,ms210 and 026 pro last time out fixed all three and cleared $250 after buying parts all in a matter of about a week sold them right out of the front yard and craigslist, I love it !!!!! wouldn't trade it for...
  15. M

    385 XP aftermarket ?

    oem cylinders are great but if I get it and down the road it needs rebuilt I would never pay that much to rebuild it if there is no aftermarket kit for it i probably won't buy it' just not worth it when I can keep my 066 and rebuild it all day for under a hundred dollars !!
  16. M

    385 XP aftermarket ?

    does any body know if the 288xp or the 395xp cylinder kits will fit the 385XP ? I have a chance to get one just rebuilt by the dealer with oem husky cylinder and piston for $400 just what he has in it , the guy never came to get it after he said go ahead and rebuild it, it is a beautiful clean...
  17. M

    MS 260 Pro Price Check

    probably more than it's worth , people sure love those things:bowdown: your probably looking at $ 250-275 on the very low end and up to $400 on high end I believe they are way over rated and over priced sold mine about 3 weeks after i bought it and I paid $250 at a pawn shop and it was in...
  18. M

    Rebuilding a 575 xp

    I just took the old bearing to the bearing shop and matched it, he said as i watched him look it up that they were good for over 20,000 rpms
  19. M

    Rebuilding a 575 xp

    the sealed bearings are aready internally lubed no reason for any more if you take the seals off then you might as well have just bought new oem bearings and seals, the reason i used these vwas price, $10 bucks a piece, I don't believe u can buy oem bearings and seals for $20 dollars, also they...
  20. M

    Husqvarna 268 problems. Could use some help

    try a carb off a known good running saw, hows ur adjustments on the carb you have now ? , I know as little as a 1/16 of a turn on the L screw can make a world of difference in starting
Back
Top