Search results

The crankshafts seem to be alright and are pretty tough ive found compared to some you wont know until you open the saw up

Got 16 of these in my shop all but one needed crank bearings you need 6202 and 6203 c3 bearings if your replacing them. Take the cylinder off most likely there will be plating lost on one or both sides, this will cause a lack of compression. The exhaust is totally normal happens to all of...

I had a 359 with the same problems, it recieved a 346xp carb and a 350 intake boot only reason for the 350 intake boot as the inpulse line was pinched on the 359 probably the orginal problem but it all seemed to work fine even with the 346 carb idle and accelerated fine.

Iam sorry but for me the 372 just takes the ticket every time Ive had 3 must be biased lol

yes a normal 6203 bearing will work but may not have the plastic insert that holds the balls but a metal one. I have used non stihl bearings and it seems to be fine. Just make sure you buy a 6203 C3 bearing as the c3 is the clearance it needs for high tempratures etc .

The cut off saw is a Dolmar 309 I currently have one sitting in my garage in need of a set of rings. I have rebuilt many of them and they are probably the most bullet proof saw that I have ever had. They also weigh a ton so not really comparable to the newer stuff.

372

Anyone got a stihl ms362 ipl by any chance I will be needing parts for one if i win it on ebay Thanks Simon

This is the nicest thing to see, instead of sitting inside, typically gaming. I have to say all you guys are right but thats how people learn to work on thing to actually do it. I cant call myself and expert on anything but at 18 I can rebuild about any 2 stroke machine which I would never of...

If you could get away with lightly honing your cylinder a 61 piston will work http://www.arboristsite.com/chainsaw/114766.htm

Evening gents Long time since i posted but I have always been sitting in the background. I need to ask a favour. I rebuilt a Stihl 066 about a month ago had to split the case to because a bearing was rough. Replaced the bearing and case gasket and seals. I then went on to sell it. The guy...

I had a 084 with a bad coil I bought a 088 coil because I had the 2 keyway shaft so might work for you ?

n i dont think thats the eproblem thanks anyway

Thanks that would be great

It is definately factory but is like a race that the bearing goes into I assume that it has spun the insert. If it had not turned you would not know

Afternoon all I have just bought a Stihl 064 with a scored piston. The cylinder was fine but the piston was scored. After tearing into the saw I thing I have found the cause of the problem. It seems that on the clutch side bearings there was excessive play. So I split the cases and sure...

Evening everybody (at least for people in the UK) Just a quick one I have just bought a 346 and 357 which have both broken needle bearings. The part number for the 357 is 5032552-01 but I cant find a size so I can buy a generic bearing if anybody could help that would be great Simon

Sorry I know that was to brief, the Jonsered the guy is talking about in his post its on ebay with a past history of ripping crank seals up.

Its tearing seals up I ve just seen it on ebay. Theres a couple nice 371s up at them minute

Anyone got both of these items laying around. Iam thinking of buying a saw with these parts missing just seeing if anybody has the parts before I buy. The cost of new is way to rich for my kind of use. I will pay everything and shipping to the uk. Cheers Simon