Search results

I'm looking for a hydraulic oil cap for a Husky 250PS pole saw. The part number is : 502420603 / 502 42 06-03 I have PayPal or saw parts as trade fodder. Thanks in advance for any replies, Bryan

Hi all, I have a Granberg MKIII (I think) mill I've been using for around a decade. I primarily mill softwoods for timber framing that are longer than 16', as many mills around here don't like to mill over 16', and when they do, the bd/ft price goes up considerably. I have to mill a few...

Hi all, I'm in the market for a 4000watt +/- generator with at least one 220 outlet. I have no issue with spending accordingly for a good tool, but have recently noticed a lot of young Honda's & Generac's failing catastrophically, and not because of user error/lack of maintenance. Who is...

Looking for a starter for one of these: http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/064b5734e44f059888256d06005680d6?OpenDocument A buddy picked this up the other day, looks complete besides the starter:

Just like the title says. If anyone has one laying around that they can spare, I'd greatly appreciate it. None of the Stihl dealers around me have it, and the lead to time get it is more than I'd like. $$$ or parts to trade. Thanks in advance, Bryan

Hi all, I'm looking for a used OEM one. I have a new OEM one, but it's gonna look odd on a saw that's clearly used. No cracks or breaks please, I don't mind scuffing/some fading. I have $$$ or plenty to trade. Thanks in advance, Bryan

Hi all, Just like the title says. OEM only please. I'd like one with no cracks or breaks, and don't care about cosmetics. I have PayPal and plenty of trade bait. Thanks in advance, Bryan

Hi all, My buddy ran over his 020 AVP. The motor is fine, and I have handles for it, but I'm looking for everything else. A unit that's seized or has a burnt top end would be great. I have lots to trade or $$$. Thanks in advance for any replies, Bryan

Hi all, I'm putting some feelers out there for a friend who's looking for a nice, complete, & running 2100 or 2101. With working chainbrake preferred. Post up what ya got! Also, please post or PM price(s). He knows what they're worth, isn't expecting a tip-top saw for $300, and is ready to...

Hi all, Just like the title says, I'm looking for some 2071 (and like models) parts. -Brake handle/flag -Clutch cover -Top handle I'd prefer a side-tensioner clutch cover, but any cover is better than no cover. I have lots to trade or $$$. Thanks in advance, Bryan

New OEM 044 Crankcase. It's an early 10mm one, with the smaller starter screw holes. Includes both main bearings, case halves (of course), two alignment pins, and five case screws. Does not include case gasket or seals. A bit dirty; not surprising being that it's been sitting in a shop for...

Hi all, I'm interested in seeing what's out there for Husqvarna bows. I'd like to put one on a 365 or 372xp. Cash or trade. Thanks in advance for any replies, Bryan

Like the title says, I'm looking for a clutch cover and an air filter cover. I'd like used OEM (this saw isn't nice enough for shiny new parts). Part loss and scuffs are fine, and maybe a small inconsequential crack here or there. I've got lots to trade or $$$. Thanks in advance, Bryan

Just like the title says, I'm looking for an Efco tank. It can be bare-bones, and cosmetics manner minimally, as long as it doesn't puke fuel and is one piece, unlike my buddy (who needs this)'s tank that decided to dive off a tractor winch and under a tire today. Let me know what you have...

Here's the nicest looking 920 I've ever seen in person. 100% stock, everything works as it should (including the chainbrake), piston is spotless, and it's got a full wrap to boot. Nothing is cracked or broken. Loads of fun to run (especially blocking sugar maple with a 20" :cool:). $600 +...

Howdy, I just picked up a nice CS-60S project. I'm looking for the following: -Carburetor adjustment grommet -Manual oil pump innards: basically, I have a bare pump housing, so I need everything inside of the pump, all the way out to the push button -Oil pickup line -Oil cap These...

Title says it all. I'd be interested in two air filter covers, but will take what I can get. $$$ or trade. Thanks in advance, Bryan

Here is a nice (nearly) all-original 288. Everything works as it should. OEM piston looks excellent through exhaust port, very stout compression, and a strong runner. This saw does have a decomp. I replaced the brake handle with a new OEM one (as you can tell in the photos, I forgot to...

Here is a nice 262XP I traded for recently. Everything works as it should, nothing's broken. Seems to be a pretty well-kept saw, as I did not clean it beyond 10 seconds of air. Piston looks excellent through exhaust port. Mahle decomp cylinder; HDA 87. $400 + the ride. Let me know if you...

Howdy all, I'm looking for trade for or buy a Stihl 066 top cover and air filter cover (HD preferred). Fading is fine, I'd prefer no cracks or breaks. I have a good amount of used and some new parts to trade for many makes and models. That, or good ol' green. Thanks in advance for any...