Search results

The bar doesn’t look as bad as some I have reused so long as the tip is good the rest you can always tune up.

Hmm that’s wierd as it absorbs water. Learn something new every day

Mines a Reznor Brake fluid is not flammable I have close to 30,000 hrs on mine burns 1.7 gal per hour

I burn waste oil in my furnace designed to do that. Up to 25% gasoline is ok. I have been scraping a bunch of vehicles. All the clean oil goes into 5 gallon buckets for bar oil. ATF differential oil power stearing fluid I have over 20 gallons in stock. Been using it for years no I’ll effects...

Had the 3406 Cat I’m my Western Star run backwards when I was a little late on the clutch pulling a belly dump in soft ground

Power Machinery is the company that was based in Vancouver Canada. They made a saw that they named Canadien, it was marketed in Quebec for the pulp wood cutters at the time. It was based on the model 21

Hi Mark Is it a metal to rubber mount that has the metal torn off? If so I have used the urethane glue that is used to install car windshields to glue them back together. So far one on my limbing saw is holding

On or two ? I could use two but the one saw is pretty rough so the rough cover suits it, it will probably become a donor

I need one two

Fixing it for yourself or the customer? I got one a few years ago that had been out in the weather. Carb was corroded but with some parts off a pump engine I found I did get it running it was a personal challenge

I got some from Napa I used to find the leaks in my C7 injectors

I am lucky enough that one of those found me.

While doing the pressure and vac tests did you rotate the crankshaft?

Yup Just have to be smarter than the cap.

Hi Kelly The proper way to remove the flywheel is with a puller. There are sometimes threaded holes in the flywheel for bolts that would go through the plate of a puller, with a center bolt of the puller pushing against the end of the crankshaft. Some like Stihls have a threaded area around...

Ask @heimannm as he is the Mac expert. He might know other models that share the same crank. He may also have NOS crankshafts or know someone that does

Nobody ever had plating issues Some of the other makes of dishwasher pods turned the aluminum black

Tide pods as they were colorful like candy

Watch for a parts saw

There were some guys who boiled cylinders with dishwasher pods that claimed great results. The Walmart brand were the favourites if my memory serves me right. I ment to try some junk cylinders but never got to it. Probably because the nearest Walmart is 100 miles away and never got any pods...