Search results

it's just a safety measure to avoid possible liability for injuries ## This mechanism can not prevent the kickback

Boy you really love machines

Sorry for your loss. Sašo

My apologies this is your thread, when I get time I'll do some photos of the current state of my kinetic splitter ps:Sorry for bad English

bower4311 This last splitter is a completely different concept and it is not for this topic

What is the Pitch diameter

I'm not engineer my knowledge is only practical My defense for flywheels of the truck is just in this that they are made to revolve far more than is necessary for the splitter they are capable of rotating up to 5000 rpm without worry ,here is the safety all that is possible to find the...

#99lb each #19 inch wide OEM application??? # I paid them $ 100 # they are from the same type track gear #is that T 16961 16 http://www.ideal-velenje.si/pdf,cdr/str_el_2/03-Celni_zobniki.pdf #they cost me 20$# rack consists of two narrow pieces that are fitted to flat iron 2.5x 0.8...

why not be a good choice my flywheels have a larger part of the weight on the outer edge # flywheels can be found in scrap yard for little money # and most importantly they are balanced there is no limit for rpm

yes I have made a kinetic spliter # flywheels weight 45kg 48cm diameter # rack module 4 16 tooth gear # powered electric motor 1.1Hp for now , In the future Gasoline engine 5hp # flywheels rotating at 220 rpm # possibility of towing and adjustable working height

http://www.youtube.com/watch?v=YXl4FZEqw6c http://www.youtube.com/watch?v=256rBriIT28 http://www.log-splitter.biz/fly-wheel-style-log-splitter-lsg28hp.html

getting jealous in my country no one offers free wood

minimum 1200 F up tu 2300 F in the chamber

user must be satisfied and he is the best advertisement

what kind of material would you recommend for the shaft

DIN C 45 http://www.sinama.com.tw/page11.html

my flywheels are 100 paunds each my problem with shaft is because I chose wrong material he bent a little and it's the reason because I purposely forceful to test it my shaft is 35 mm thick

The mechanism is the same as the Dr Rapid Fire or Supersplit

Choosing the wrong material for the shaft

I managed to bend 35mm thick axle on my splitter