Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. deye223

    Tuning screw drivers

    This is mine
  2. deye223

    MS460 what year is it?

    Thanks
  3. deye223

    MS460 what year is it?

    It was bought in the us as far as I know before I got it .
  4. deye223

    MS460 what year is it?

    Any chance you could run this one please .
  5. deye223

    044 starting kickback coil flywheel

    Narh mate ya gotta do it upside down or is it downside up ......
  6. deye223

    044 starting kickback coil flywheel

    Just pull it like you mean it problem solved
  7. deye223

    I may have messed up

    Some of us just want to get the job done quickly and with as little fuss as possible faster the better
  8. deye223

    Best chineese chainsaw?

    You should tell your friend there is only so much glitter you can stick to a turd. as was said earlier put a carb kit in an older saw and don't look back
  9. deye223

    044 flywheel nut torque and air gap

    Air gap for me is standard business card and never had a problem even if it is wrong
  10. deye223

    Another (sort of) oil thread

    I use these
  11. deye223

    Another (sort of) oil thread

    Not sure I quite understand the question but all I do is fill up the oil reservoir and watch the level come up to the top and then stop no problems .
  12. deye223

    The problem with the ms880

    If you're 461 is slower than 880 in 24 inch would you have a problem with your 461
  13. deye223

    Stihl ms261c or bigger?

    Farm Boss are a clamshell design I think
  14. deye223

    Stihl ms261c or bigger?

    What is the 1st number in the serial number
  15. deye223

    Bearing temps frustration.

    Are you freezing the bearings
  16. deye223

    Ms460 felling spikes issues (pics )

    Yes I've put dawgs like them on a 261 they only lasted the week then I took them off .
  17. deye223

    Ms460 felling spikes issues (pics )

    Your 660s must be different to here in Australia ours have a large dog like the 460 but the bottom spikes angle slightly upwards to stop it pulling the bar into the wood and stalling the chain .
  18. deye223

    Ms460 felling spikes issues (pics )

    My 460 My 461
  19. deye223

    MS 660 - Saw it on Craigslist...

    It's a big bore so ported or not it will be about 1 horsepower less than a stock one
  20. deye223

    Ms460 felling spikes issues (pics )

    Others were saying his outer is the wrong one I'm saying it's the right one now as to the lnnner I will go out to the shed when I can and I will get the numbers off the inner but it is the wrong one because on the inner his bottom spike is the same length as the one above it and that's wrong
Back
Top