Search results

I did some searching but couldn't find a similar issue. My 390 runs good but the plug was looking awful white when I pulled it. So I decided to do a pressure/vac test. I'm getting bubbles (soap water) between the inner race and the crank on the pto side. I'll split the case after poking around a...

It seems the only piston I can find for the PS5105 is $70? Seems rather high. Are there any other options? Aftermarket or any other saw that I could swap in?

I recall reading a thread a few weeks back that Husky dropped their price on the P&C kits. But, I can't seem to find a link to it now. Did Husky drop the price?

This bar followed me home the other day. I don't know why. Only use I can think of would be milling maybe? Get the log down to where I can use my 36" MKIII? The mount pattern is not something I've ever run across. Some type of universal mount? There are zero makings on the bar to help ID it...

Hi, my G555b will arrive in two days. I've been trying to think of the best mounting material for the rail. I know they state to use a 2X6. I was thinking about something more stable like a home made "lam board". Plywood strips cut on the table saw and glued together. It would be stable and...

Hi All, I usually hang out in the chainsaw forum. Which eventually lead me here because my daily craigslist saw searches found me a 36" MKIII, 36" bar, 3 new milling chains, 2 new full chisel chains and the ladder to make the first cut. I've been reading a great deal here. Thanks to all that...

The old Briggs on my log splitter still runs great. I'd like to keep it going but the intake tube between the updraft carb and intake port broke. I cleaned it well and used JB on it. It lasted for a few years. It's now broken again. Part is NLA and I can't find one anywhere. I'd like to get...

Last week I picked up an Alaskan MKIII and a 36" Stihl es bar (I have the stihl to husky adaptors) with 2 milling chains and 4 rsf chains. Found it on CL. I have a 394 and a 395 that are already case split and all new parts are in the box with the carcasses. Just waiting for time to put them...

I purchased this from a friend that "has the manual somewhere". But, I know he doesn't. Any way to ID this so I can find any on-line manuals? Excuse my lack of technical terms. I have no clue on the hydraulics process. The issue: The 8hp Briggs runs well but the cylinder moves very slowly out...

I have a husqvarna 575 ( I know, I read all the threads/reviews) that is in like new condition. I got it as a parts saw that "needs a new top end". There was very, very little scoring on the piston and the machine marks were like new. So, I put in a new caber ring. Vac/pressure test, fuel line...

Anyone have stock OEM port timing numbers for a 55 rancher? My search lead me to some closed port 55's but nothing on the open port.

I run a 10 inch bar on mine for limbing. A friend came to help me cut and ran it for a few hours. After that he said he'd like me to find him one. I would prefer a complete saw. Doesn't need to be a runner but I'd appreciate knowing what it needs. Let me know what you have and a shipped price...

I have a lightly used Oregon 511AX that has a broken part in the chain vise bed. If you have one that's worn out or has too much play the part I need is likely still good. I tried to JB Weld it but it broke when I put a chain in the vise.

First off, pics please if you have done this. So, I picked up a Poulan 2800 yesterday. It has a bar stud broken out. The case is broken on the rear stud and someone tried JB on it. Didn't hold. I got to looking for a case half on fleabay and found red, gray, green, black and yellow parts...

Hi, I'm looking for a clutch side case half for a Poulan 2800. Green would be nice but other colors might make an interesting looking saw. In fact, it would be funny to have one part of each color on this saw. My minor research tells me the following saws are donors: Poulan 2700 2800 3000 3100...

I'm looking for a good used OEM crank for a Husqvarna 359. My limited research shows a 357 and a Jonsered 2159 would work. PM me or email [email protected]

I've got a friends 359 on the bench now. He broke the clutch side case half about two years ago. He had a tree go a bad direction and it pinched the saw and snapped the lower rear corner off the case. I kept telling him to get it to me in the off season so it doesn't interrupt his cutting during...

I purchased this VERY nice 372 here in the AS classifieds in late December - link below. http://www.arboristsite.com/community/threads/low-hour-pre-xt-husqvarna-372xp-565.248894/ It looks nearly new with one exception being that the top cover is not perfect. Very nice. But not perfect. I have...

Hi All, I sold one of my 372's the other day. Unfortunately I offered to look over an MS290 that runs but has no power. So, it will not hold vac or pressure. I pump up to 5 psi and in 5 seconds it's gone. Same with vac. What should the specs be for this saw once I resolve this issue...

Hi All, I sold one of my 372's the other day. Unfortunately I offered to look over an MS290 that runs but has no power. So, it will not hold vac or pressure. I pump up to 5 psi and in 5 seconds it's gone. Same with vac. What should the specs be for this saw once I resolve this issue...