Search results

carb screen plugged up? try pulling the spark plug and pore a little gas mix replace and try to start

Around here it's about $90 an hour and $125 deposit for parts and labor 'non-refundable' when you drop off your chainsaw. If it sits for 90 days it's gone.

2100cd at idle

is there anyway to replace the pins? It is a site sponsor past 1 year warranty less than 15gal through. Dan that is the piston that failed.

Big bore kit from Baily's no problems I was wrong bad lighting my fault Just took apart the 372bb and the piston ring pins are gone no sign of damaged to piston or cylinder. So what's the best replacement slug for 372 xp bb?

Run the 372 xp and the ms 461 and see which on feels better in your hands. LOVE my 372xp bb mm.

.058 chain in a .050 bar?

25lbs

Safety chain great for dirty wood and people new to saws (less potential for kickback). The line on the last hump also gets filed down as the chain gets sharpened.

Do you know what your compresion is? If it's on the low side it will not be happy with 93. The other posibility that the 93 you got was old.

ms 361 If this turned into a poll :msp_thumbup:

117 has a 35mm stroke 6400 37mm

2100xp is a great old saw but 2.5 times as heavy as your echo. I usually grab my 372xp for everything. Old saws are hard to find parts for. A 044 or 440 are both great saws with high resale value (even if it is broken).

clockwise to remove clutch?

dolmar dcs 9000 thanks

If you don't mind 2 more pounds 390xp rips and responds well to mods. My vote is a new 390xp woods pored and MMed. .02

Looks like a boring bug all those 1/4" holes tell me so. When the trees see 4-5 years of drought the tree can be attacked and may not recover. Beware the 'fire wood' is probably full of the critters.

260 pro this is why I'm at mile high and the 250 is ok (a lot of plastic) but if you plan to work on the saw your self the pro saws are sooooo much easier to work on.

Tough to get on but I could pull it off with a fingernail. Yes it was in the grove and the spur spins smoothly. I even fired up the saw. I will try a new one. Never had a problem with the ones at a dealer. thanks all

I'm working on my uncle's ms 250 and the e-clip keeps slipping off. How soft are e-clips supposed to be? The clip is form a site sponsor not box store. Just seems to open as it goes on and not close rite. Yes it is in the grove. thanks in advance