Search results

chipper I have a 5.5 craftman chipper/shredder. All of the previous posts are accurate. My chipper has a chute about 2'x2' square that folds left and right to the ground for leaves also.If you have alot of leave in the fall,this thing is great! Dry leave are turned to dust as fast as you can...

soak em in Kerosein.diesel fuel or kroil for a day,then mount them up once loose and run them.

Cool!! I think I will bolt it up and see what it does,then maybe add another port to it!! Thanks Steve..

Samples for what. Were they built to run on the 372. I dont need a stock muffler as I am going to mod it anyway!! Steve..

Got it at the ohio GTG.

I got the muffler at the gtg. If it will fit the 372 I will keep it because I wanted it to do a muffler mod anyway. Will it fit? Thanks Steve..

I have one,but it does not look like the factory muffler. Its the same shape and everything, but it only has one round exhaust outlet and no baffle inside. I got it to do a muffler mod,but it looks like it is already modded. Just 1 round port on the front left side. It looks to be about 3/8 to...

Thanks so much! The carb does have a plastic disc about the size of a dime with a small plastic tit on it. I can't believe that Zama does not have contact information so I can talk to someone in the company! There website does not list this carb number...

I have a homelite 330 and need to rebuild the carb. Zama's website does not list this carb and does not give any contact info. I also need the intake boot for this saw. Can anyone help me? Thanks Steve

I am thinking of buying bulk chain and making my own. Chains will go on a 372xp,455 rancher,jonsered 630 and a makita 6401. How many chains can one make (in general) from a 100 ft roll if you make 18,20 and 24 in chains. Is the savings worth the investment in the tools used to make them...

70 here in pataskala ohio today. Very muddy for splitting/sawing. Ended up noodling some big rounds so I could spread the sawdust to keep the mud at bay while splitting. I would rather it had stayed frozen. Steve

jonsered Absolutly not true. I have a 1984 jonsered 630 and had to replace the gears for my oil pump. Call Baileys,they will hook you up. Steve

My jonsered 630 starts and idles fine.However when I try to cut with it it has a definate lack of power and bogs. Also when I rev the saw out of the cut, the saw will rev high for about 5 seconds and then start to die unless you let off of the throttle. I have opened the high side adjustment...

Go to Tractor Supply, you can get a 1557 hotblast for $850.00. I have one and heat 2000 sq ft with it. I heat from mid October until almost April. I use approximately 5 cords and the furnace is never run hard or hot. My house stays a constant 73 to 75 degrees. Of course I can run it and before...

I have a Wheelhorse just like yours. Put a set of tire chains on it and it will go just about anywhere and will pull just about anything. I pulled 1 1/2 cords of wet wood up a fairly steep woods hill. The wood was in a 6x10 trailer. Dont know what the tounge weight was ,but most of the...

I have a 1557 w/ an inducer. In my opinion the inducer is useless. My hse is 1850 sq ft and with all the air closed down to the furnace and air shutter for the inducer fan open, air just screams in. If you load up for the night and leave the shutter open and the hse not calling for heat the...

I have a 455 and a 372xp. Of coarse the 372 is faster, but the 455 will do what you want it to just fine! It will pull a 24" bar with a sharp chain reasonably. Baileys have the 24"cj mount in stock. Keep the 455 and give it a chance!!

Sell or give it to me. I will rebuild it and give it a loving home!! Steve

I will get picts asap,but I am leaving florida for a wedding on thurs retuning on monday. I will get them before if I can but as soon as I return. Thanks Steve.

flue install. I was faced with the same problem. Here is what I did. If you run out the window your flue pipe will be to close to the celiing and could cause a fire and or insurance problems. Scrap the window idea! Simply move over left or right of the window,dig a square box outside...