Search results

Yea I saw those. My main thing is the choke lever.

KNOB LEVER: 1116-182-0800 Air filter: 1116-124-0800 or 1116-120-1600 Not sure what air filter is what. I assume one is maybe felt and one is flocked, or maybe one is a screen.....anything is better than none lol.

Just acquired an old 015 top handle saw and it’s missing the black plastic choke lever and the air filter. Appears everything else is there If someone has anything I’d be very interested. Thanks!

Does that thing have much of a muff mod? Sounds quiet. Definitely idling on the fast side....im a hot rodder, so I like them to idle as low as possible lol.

But would you expect that since it cuts better with 16" 3/8 than an 18" .325, that it would likely cut the fastest with 16" .325?

I haven't got to try mine yet, but I mainly just wanted the bar....plus I mostly clear brush.

We run STIHL chain and bars almost entirely on everything. Dad has used about everything and prefers STIHL chain and STIHL bars. I've got an Oregon chain on my MS290 Farmboss, but that was just because the local hardware carries Oregon and the safety chain it came with just wasn't cutting it...

Well my neighbor gave me the saw and there was no chain in the case, but the bar that was in it was 3/8 .58 gauge?!?! I'm not really sure what happened over the years....but I'm guessing someone picked up the wrong parts a time or two! Man does this chew through the wood now that it's a runner...

Here's the bar and chain combo. The specs match the Stihl specs. Here's the rim sprocket conversion I intend to buy sometime in the next week or so. I had my 16" bar and chain from my 290 FARMBOSS on it and it was fine and the chain still looks completely fine after I took it off...

Well I was following this post because I've got a similar issue, but apparently not going to be the same solution....I put a new bar and chain on my 028 WOODBOSS and the chain rotates fairly smooth, until it tighten it down. When I put the final torque on the bar nuts, the chain gets either so...

Mine is just a 55 Rancher (built a 50 a year or two ago) I have the numbers written down somewhere, but I did some mild work to it. It was originally the 3/8 7-pin. The 50 was .325 chain 7-pin I believe. I just want this one to cut really fast, it won't be a felling saw most likely. If I keep...

http://s636.photobucket.com/user/thefarmboy21/media/37D4F58A-AEC3-4851-AB84-F055605820E8.jpg.html][/URL] http://s636.photobucket.com/user/thefarmboy21/media/2E0444B7-9BE8-4EF2-BCA2-5CC036E45D4E.jpg.html][/URL]...

So I was at my lol Rural King this evening and thought I'd try out a TRILINK bar and chain combo, since they were only $29.99 and everything is 12% off (after rebate of course) I figured that if I was gonna buy one, now was as good of time as any. Sure I'd rather have a STIHL bar, but I just got...

Let me know what rim/chain combo works out best. I need to order the rest of the parts for my 55. How many degrees did you advance your timing?

Wasn't it just in the last year or two that TSC did away with (or lost) the Husky line and went to J-red?

It's got electronic ignition.

That's what I'm thinking, unless it somehow got out of time. I'll take it apart and swap out the diaphragm and check the setting on the metering lever.

Just thought I would update the thread: I took the brake apart and cleaned everything, and used a dremel to clean up the brake band and clutch drum. I fixed the recoil/starter with some JB Weld, just enough to test the saw and jeep for a backup, but his new recoil has already came in. I found a...

A while back, a guy I go to church with gave me an 028 AV Woodboss EQ. He thought it was blown up for whatever reason. It was free and came with a STIHL hard case, so I didn't care. Turns out the plate under the carb diaphragm was completely full of sawdust. It came out like a biscuit. The...

Yea I ordered the tool last night....$6 for a Huztl from Amazon. I think someone didn't line up the chain break and the clutch drum and ran it and fouled it up. Not the break lever flexes pretty good.