350

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Husqvarna 350 won't rev up

    I have a husqvarna 350 I bought used. It ran great when I first got it, but after cutting for one day, now it wont rev up and stalls out. I have completely replaced the carb, fuel lines and intake boot. When it starts( relatively easy) it will bog down when throttle is opened, and acts like the...
  2. MAngelotti1

    Want to Buy Timber jack 350

    I’m looking for engine side screen for a timber jack 350.
  3. L34

    Jonny CS2150

    Hi all at AS. Can anyone tell me if a Johnny 2150 has the same D handle as a Husky 350. Or has the Johnny got a different curve. Cheers Chris.
  4. Bama Raised

    Husqvarna 350 Base Gasket Material

    I am interested in making my own base gaskets for a couple of Husky 350's that I am rebuilding. What would be an appropriate gasket material for that? Thanks in advance!
  5. Bama Raised

    Husqvarna 350 pressure test

    Today I was pressure testing a Husy 350 that I am in the process of rebuilding. I had an air leak around the spark plug that I was unable to stop without the use of an o-ring. My question is, is it normal not to be able to achieve an air tight seal simply by tightening the plug? This is only my...
  6. M

    Which saw?

    Hello everyone. I am in the market for a used saw. Just a homeowner looking to cut a few cords of wood and clearing brush on my property. The ones I am trying to choose between are all the same price and in similar shape. I am trying to choose between Husky 51 Husky 350 Husky 455 rancher...
  7. V

    Want to Sell Jonsered 2145 converted to CS2152 specs

    Well my first time selling in a long time..... Jonsered CS2145 chainsaw. Saw was completely broken down and rebuilt and brought to Jonsered CS2152 specs using the best factory parts. This saw does not have the magnesium cases of the 353/CS2152 saws. They use the same piston and cylinders of...
  8. Kensie1988

    First Saw rebuild, husky 350

    So I got a Husqvarna 350 for $100 non running as is. I thought it was a decent deal so I went ahead and picked it up. Now I've started tearing it down for a rebuild and wanted to get some opinions on what route to take I see a lot of people building them into a 346xp, I'm leaning towards this...
  9. Kegerator5

    Want to Sell 2 Husqvarna 350 and a 440

    Looking to sell 3 Husqvarna saws. 2 are 350's. 1 is a 440. All are in need of rebuilds. I bought the 350's to turn into 346xp's. I got the 440 because parts availability are plenty, and I figured it'd be a cheap fix to have a good running saw. Things change. Life happens. They are for sale...
  10. C

    Husqvarna 350 wont start after chain popped off bar?

    I have a husqvarna 350, it's an older saw but it still ran great up until last week. I was cutting some tree limbs at work and the chain popped off the bar. So I put the chain back on just like every other time it had popped off and adjusted the chain tension. When I tried to start it, it...
  11. jeff88

    building a 445 husky

    Hey guys quick question I'm trying to gain more power out of my husqvarna 445 it is a 2008 model factory jug and piston is a 42mm I was thing about putting a jug and piston for a 450 on it wich is 44mm any thought or suggestions on this.
  12. Andrew W.

    Another husky 350

    I have a Husqvarna 350, I am in need of a new piston and cylinder. I have read almost every recent thread about a 345-353 rebuild, 346xp swap, I don't know what to get for my little 350. I'd like to have the power of the 346xp, but would it be easier just to put a normal 350 AM cylinder and a...
Back
Top