"2015 You Suck Thread"-Pictures required
- Thread starter 295 tramp
- Start date
Help Support Arborist Forum:
Jason Smoot
ArboristSite Operative
Thanks. Gonna give it to my little brother. Be his first saw.
Jon1212
Riff Raff Fart Knocker from other Forum's.
That's super cool of you.
I did something similar with a low hour scored 359 I picked up for $50. I had TermiteBuffet of Zoo City Sawz replace the top end, and woods port it, and gave it to my 15 year old son for his official first saw.
sld961
Addicted to ArboristSite
None of these are new deals, but I figured I would share my best scores with you.
First is a minty 026 that I got for $75. It's a little dirty in the pic.
Next is an 034 Super that I got for $50. Then it got neat little sticker on top for free (courtesy of Randy for last year's Christmas Giving Thread).
Next is an MS460 that I got for $200. Needed a pull cord and air filter cover.
These three saws are my "keepers".
Last is a Masterminded MS 661 that I (half) won in the Chitty Avatar raffle. My buddy that went in with me on the tickets bought me out, so it's his saw now, but I can use it any time I want.
First is a minty 026 that I got for $75. It's a little dirty in the pic.
Next is an 034 Super that I got for $50. Then it got neat little sticker on top for free (courtesy of Randy for last year's Christmas Giving Thread).
Next is an MS460 that I got for $200. Needed a pull cord and air filter cover.
These three saws are my "keepers".
Last is a Masterminded MS 661 that I (half) won in the Chitty Avatar raffle. My buddy that went in with me on the tickets bought me out, so it's his saw now, but I can use it any time I want.
It's from a few years ago, Echo 900 EVL. Needed a cylinder cover, bar nuts, and bar & chain. Friend found it in the trunk of a car being prepped for the crusher. Fresh gas and it runs and oils good. Friend gave it to me for free with the agreement we split the money 50/50 if I sell it. Still need a cylinder cover yet, so it's a GTG saw yet.
SteveSS
Addicted to ArboristSite
You should double your money on that one if you flip it.
That's what the original owner had it set up for. I'll probably use it for 3/8 & 404. Then use the 511ax for .325 & 3/8LP. Finally use my 511a for rakers. But we'll see how that plan all shakes out.
Sent from my iPhone using Tapatalk
bikemike
loud pipes save lives
At Brainard mn gtg had a great time. Ran about 75 to a 100 saws. But not only that my 2 you sucks is the fact i had the strongest top handle arborist saw echo 360t and also bought a echo 50cc power head that started 3rd pull for 6bucks
026 dirty? $75? YOU SUCK!!!!!!!None of these are new deals, but I figured I would share my best scores with you.
First is a minty 026 that I got for $75. It's a little dirty in the pic.
Next is an 034 Super that I got for $50. Then it got neat little sticker on top for free (courtesy of Randy for last year's Christmas Giving Thread).
Next is an MS460 that I got for $200. Needed a pull cord and air filter cover.
These three saws are my "keepers".
Last is a Masterminded MS 661 that I (half) won in the Chitty Avatar raffle. My buddy that went in with me on the tickets bought me out, so it's his saw now, but I can use it any time I want.
Didn't see you name on my list for the PA GTG May 9.
bikemike
loud pipes save lives
Post a vid of the mastermind 034None of these are new deals, but I figured I would share my best scores with you.
First is a minty 026 that I got for $75. It's a little dirty in the pic.
Next is an 034 Super that I got for $50. Then it got neat little sticker on top for free (courtesy of Randy for last year's Christmas Giving Thread).
Next is an MS460 that I got for $200. Needed a pull cord and air filter cover.
These three saws are my "keepers".
Last is a Masterminded MS 661 that I (half) won in the Chitty Avatar raffle. My buddy that went in with me on the tickets bought me out, so it's his saw now, but I can use it any time I want.
bikemike
loud pipes save lives
I love the 026 the dodge geeks run built by treemonkey tached out at 17.300 it was a fun lil saw. You can se the vid on Brainard gtg threads026 dirty? $75? YOU SUCK!!!!!!!
Didn't see you name on my list for the PA GTG May 9.
husky 181 81cc for $125 is about the best I have had for 2015. Still dont beat the FREE 084 years ago. 
sld961
Addicted to ArboristSite
May is a real busy month. It doesn't look like I'll be able to make it. I wish I could.
sld961
Addicted to ArboristSite
I'll see if I can make one here this week.
395, P61, 1074's, 1073's, Homelites, Poulan's, 61 Husky, some other big Husky's, two huge Solo's
Some Remington's, a Lombard, Echo's, a pile of MS170's, MS290's and 200T stuff
Of course a bunch of junk Mac's, Poulan's, Craftsman Walmart saws
Some Remington's, a Lombard, Echo's, a pile of MS170's, MS290's and 200T stuff
Of course a bunch of junk Mac's, Poulan's, Craftsman Walmart saws
$40 for all of the below...
Jred and homelite schwag.
OEM Mac depth gauges...
3-4 crusty but new Jred hats
3 NOS bow bars: again crusty form wet storage but NOS none the less
Sent from my iPhone using Tapatalk
Jred and homelite schwag.
OEM Mac depth gauges...
3-4 crusty but new Jred hats
3 NOS bow bars: again crusty form wet storage but NOS none the less
Sent from my iPhone using Tapatalk
