262XP Day

[Duane(Pa)]

Aggressively.... I like that word.

 

[Mastermind]

Me too.

 

[SAWMIKAZE]

If this beats my 562 it will have to go . the 562 that is

You would honestly sell a saw because it was a second slower from one builders saw video ?

Im serious.

 

[Mastermind]

I have to agree with that post Ryan. These videos I posted were very crude......different chains, cutting styles, etc. I could care less about even several seconds in the cut. To me it's about running a saw that's easy on my old body. The 262 is the least smooth out of bunch.......well except the Poulan. The 359, and the 562 are miles ahead in the AV dept.

 

[skippysphins]

Hi randy happy to see you survived your vacation. Hope all is well buddy

 

[SAWMIKAZE]

I have to agree with that post Ryan. These videos I posted were very crude......different chains, cutting styles, etc. I could care less about even several seconds in the cut. To me it's about running a saw that's easy on my old body. The 262 is the least smooth out of bunch.......well except the Poulan. The 359, and the 562 are miles ahead in the AV dept.

Bingo.

 

[M&Rtree]

262 won't necessarily beat you to death but the 562 is one smooth saw.

 

[rattler362]

a more efficient engine. Less spitback, less fuel usage

Mine loves it's fuel it goes thru a tank of fuel quick.

 

[sunfish]

I'll keep my 562's[emoji6]

Same here! Nothing against the 262 though...

 

[gary courtney]

you about ready for mine Randy? since you practiced on these others!

 

[Mastermind]

Yeah........I'm going back to work full time on the 4th.

 

[RedneckChainsawRepair]

What I like about the 262 is I can sell 1 and buy 3-4 more 60cc poulans.

 

[Mastermind]

But the 60cc Poulan didn't come close in terms of performance.

I hoped it would do better.

 

[RedneckChainsawRepair]

Dont care about ported how they act anymore. Stock for stock is all I care about and 100% of the folks saws I work on local.

 

[Mastermind]

Dont care about ported how they act anymore. Stock for stock is all I care about and 100% of the folks saws I work on local.

That puts in the minority around here then.

 

[RedneckChainsawRepair]

That puts in the minority around here then.

Here is 1% of the chainsaw users out there in the real world.

 

[Mastermind]

Less than that. lol

 

[RedneckChainsawRepair]

Less than that. lol

I was trying to be nice. .000000000000001% then

 

[Mastermind]

Better.

 

[Tor R]

Randy, my english is not good and all this with porting the 262 is kinda new learning for me, hope I can ask for some porting ideas.

Inlet timing, i understand you prefer 72*. You dont work with the inlet, or did you widen it a bit?
What was the timing opening-close inlet timing?

Exhaust timing, did you change a bit there, and what ended your timings up to be there?
Did you widen up the exhaust port?

If I have got it correct, transfer timing 118*?

If there is anything I have overlook I would appreciate if you guide me on the correct way.