372xp XT : would like carb dimensions

[Derf]

Can anyone point me to, or measure, the carb opening dimensions on the front and rear of the RWJ4 carb that comes on 372xp x-Torq saws. I know the venturi is 19.1mm, just curious about the bore.

Thanks in advance!

 

[mdavlee]

I measured them before but don't remember. I'll try to remember to measure it again.

 

[Derf]

Thanks. Bump for update

 

[mdavlee]

Thanks. Bump for update

I'll go measure now.

 

[mdavlee]

22.5mm or .885"

 

[Derf]

Thanks... which side did you measure? The inlet or output side from the carb?

 

[mdavlee]

Thanks... which side did you measure? The inlet or output side from the carb?

Both are the same