Sold 4 way Oregon log splitter wedge

[Brushwacker]

I have a very little used 4 way wedge,Still shows machining marks on edges, has a little service rust and a very small nick or 2 on the edges. Its off an Oregon log splitter. It is 6 5/8" from the inside top to bottom, 1 1/8"wide inside diameter in back, The top extends to a total of about 8"long inside ( fits over existing single wedge). It might need to be bent down a little on top to fit flush ( should be easily done if so), I never saw it in use, not sure of exactly how it should look. I got it with some other splitter parts at an auction. The bottom inside goes back about 2 3/4". This is what it looks like but is not the actual 1 I have.
http://www.ebay.com/itm/like/321335077017?lpid=82&chn=ps&ul_noapp=true
$35+ shipping

 

[tla100]

Interested.....what that thing weigh?

 

[Brushwacker]

Interested.....what that thing weigh?

By my old bathroom scale about 7 lb or slightly more. Packaged probably 8 to 9Lb.

 

[mofish75]

If he doesnt,i will

Sent from my SM-G900P using Tapatalk

 

[tla100]

Got it. Shipped fast and as described. Good seller!