ArboristSite.com Sponsors
 
 


Annoying problem with 660

Discussion in 'Chainsaw' started by cherrycutter, Mar 8, 2009.

  1. cherrycutter

    cherrycutter ArboristSite Operative

    Joined:
    Jun 29, 2008
    Messages:
    150
    Likes Received:
    14
    Location:
    central PA
    I removed the black rubber "grommit" that encases the carb adjustments to remove the adjustment limiters on my 660. After removing limiters and installing dp cover i replaced the "grommit" I cant seem to get the thing back in correctly. Hard to find the adjustments with the screwdriver. Anyone have any advice or is there a trick to doing it? Thanks:dizzy:
     
  2. litefoot

    litefoot Addicted to ArboristSite

    Joined:
    Jul 11, 2004
    Messages:
    2,376
    Likes Received:
    429
    Location:
    American West
    You should be able to just remove the air filter cover and air filter so you can see the adjustment screws and align the "boot" as you push it in. That sounds too easy, so maybe you're asking something altogether different.
     
  3. cherrycutter

    cherrycutter ArboristSite Operative

    Joined:
    Jun 29, 2008
    Messages:
    150
    Likes Received:
    14
    Location:
    central PA
    I'll have to look tonight when i get home from work. I think I tried that but but you cant' see it. If I have to i'll tear the whole thing apart.:monkey:
     

Share This Page